Unika MitreBond 400ml & 100g 2-Part Adhesive Clear (131LA)
Unika Mitrebond & 2-Part Adhesive contains a high-viscosity cyanoacrylate glue and a rapid aerosol activator to create instant, high-strength bonds. Ideal for joiners and kitchen fitters working on cornice, pelmet and skirting board joints. The thick, non-drip formula prevents running on vertical surfaces, whilst the activator reduces curing time to just ten seconds. This versatile adhesive dries clear for a clean, professional finish on wood, MDF, metal and plastics, ensuring maximum efficiency with minimal mess.
- For Bonding Wood, Fibreglass, Metal & Other Materials
- 100% Waterproof
- Low Odour & Solvented
- Rapid 10 Second Bond Time
- High-Viscosity Non-Drip Formula
- Includes Aerosol Activator Spray
- Dries Clear for Clean Finish
- Ready-to-Use: No Mixing Required
View all: Unika Worktop Joint Sealants
This item is store collection only
Unika Mitrebond & 2-Part Adhesive contains a high-viscosity cyanoacrylate glue and a rapid aerosol activator to create instant, high-strength bonds. Ideal for joiners and kitchen fitters working on cornice, pelmet and skirting board joints. The thick, non-drip formula prevents running on vertical surfaces, whilst the activator reduces curing time to just ten seconds. This versatile adhesive dries clear for a clean, professional finish on wood, MDF, metal and plastics, ensuring maximum efficiency with minimal mess.
- For Bonding Wood, Fibreglass, Metal & Other Materials
- 100% Waterproof
- Low Odour & Solvented
- Rapid 10 Second Bond Time
- High-Viscosity Non-Drip Formula
- Includes Aerosol Activator Spray
- Dries Clear for Clean Finish
- Ready-to-Use: No Mixing Required
View all: Unika Worktop Joint Sealants
You may also like:
| Specification | |
|---|---|
| Additional Hazard Information | Always read and follow the information on the product label. |
| Brand | Unika |
| Colour | Clear |
| Label Info 1: Signal Word | Danger |
| Label Info 2: Hazard Statements | H222 Extremely flammable aerosol. H229 Pressurised container: may burst if heated. H315 Causes skin irritation. H336 May cause drowsiness or dizziness. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H411 Toxic to aquatic life with long lasting effects. |
| Label Info 3: Precautionary Statements | P102 Keep out of reach of children. P261 Avoid breathing dust/fume/gas/mist/vapours/ spray. P273 Avoid release to the environment. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P332 + P313 If skin irritation occurs: Get medical advice/ attention. P337 + P313 If eye irritation persists: Get medical advice/ attention. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. |
| Label Info 4: Supplementary Label Info | Substance(s) not meeting the PBT criteria of UK REACH regulation, in accordance with Annex XIII - ETHYL 2-CYANOACRYLATE (7085-85-0), HYDROQUINONE (123-31-9) Substance(s) not considered as endocrine disrupting. They are not included in the list established in accordance with Article 59(1) of UK REACH for having endocrine disrupting properties, nor identified as having endocrine disrupting properties in accordance with the criteria set out in GB BPR and GB PPP - ETHYL 2-CYANOACRYLATE(7085-85-0), HYDROQUINONE(123-31-9) Substance(s) not meeting the PvB criteria of UK REACH regulation, in accordance with Annex XIII - LOW BOILING POINT HYDROGEN TREATED NAPHTHA - NAPHTHA (PETROLEUM), HYDROTREATED LIGHT (64742-49-0), Benzothiazole (95-16-9), PETROLEUM GASES, LIQUEFIED (68476-85-7) Substance(s) not considered as endocrine disrupting.They are not included in the list established in accordance with Article 59(1) of UK REACH for having endocrine disrupting properties, nor identified as having endocrine disrupting properties in accordance with the criteria set out in GB BPR and GB PPP - PETROLEUM GASES, LIQUEFIED (68476-85-7), LOW BOILING POINT HYDROGEN TREATED NAPHTHA - NAPHTHA (PETROLEUM), HYDROTREATED LIGHT (64742-49-0), Benzothiazole (95-16-9) |
| Label Info 5: Hazardous Chemical Content | ETHYL 2-CYANOACRYLATE; HYDROCARBONS, C6-C7, N-ALKANES, ISOALKANES, CYCLICS, <lt/>5% N-HEXANE |
| Manufacturer Guarantee | 1 Year Guarantee |
| Number of Batteries in Product | 0 |
| Pack Size | 1 |
| Pieces in Pack/Case | 1 |
| Product Type | MitreBond 400ml & 100g 2-Part Adhesive |
| Setting Time | 10 Seconds Approximate Setting Time |
| Solvent Free | Solvented |
| Suitable Application | For Bonding Wood, Fibreglass, Metal & Other Materials |
| Vocs Grams Per Litre | 800 g/l |
| Water Resistant | 100% Waterproof |
| Z1 - UK Manufacturer Name | IPS Adhesives Europe Ltd |
| Z2 - UK Manufacturer Postal Address | Unit 1 New York Industrial Park, Newcastle Upon Tyne, Tyne & Wear, NE27 0QF |
| Z3 - UK Manufacturer Electronic Address | www.ipsadhesives.com |
| Z4 - EU Manufacturer Name | Authorised Rep Compliance Ltd |
| Z5 - EU Manufacturer Postal Address | Ground Floor , 71 Lower Baggot Street, Dublin, D02 P593, Ireland |
| Z6 - EU Manufacturer Electronic Address | www.arccompliance.com |
Hazardous - Delivery unavailable for any offshore location.
Product Contents
400ml activator and 100g adhesive.