Sculptured Coving 80mm x 2m 6 Pack (12010)

£ 64.49INC VAT

Add to basket for...

Not available for delivery

Sculptured Coving 80mm x 2m 6 Pack (12010)

Made from polyurethane. Extremely light and robust, with a density comparable to traditional timber but much easier to fit. The flexibility to follow contours of uneven walls and ease of trimming with a knife or fine saw, means a professional look with minimal filling and no splitting. No primer or undercoat is required and a classy finish is easily achieved with water-based emulsion and gloss paints. Ease of installation and superior finish means this product is worth the premium, against either traditional wood or plaster products.

  • No Primer Required
  • Primed with a Base Coat
  • Cuts Clean & Smooth
  • Light & Easy to Handle
  • Mitres Clean & Crisp
  • Smooth Cross Section

More Info

View all: Essentials Coving

£64.49INC VAT

Add to basket for...

Not available for delivery

Add to saved list...

Save
Rated 4 out of 5 by from 80mm coving learning curve I had just put up C curve polystyrene coving using precut corners and while happy with the result thoght the polyurethane coving would be happy. I choose 80mm because i thought it was smaller than the supercove coving . What i had not realised was you cannot get precut corners with the 80mm. OK , I got mitre box with clamps , you have to position 80mm from the fence but dislike the black plastic mess and it not easy for me to cut. But worked. Then i was offered a loan of a compound mitre table and told the angles to use , ie 31.6 table and 33.8 bevel. Great, liked it. Very accurate cuts. First internal corner pair woulnt form 90 degree angle , when measured it was 92. So found adjustments to compensate. Ah! Turns out that while the majority of Crown sculptured coving is 52/38 this 80mm coving is not. It is 45/45 and angles are 35.2 and bevel 30 . Success! Didnt need to compensate for 92 corner angle as slight gap easily filled with coving adhesive/ filler. Found some videos on crown coving confusing but the clearest one was sawdustgirl on youtube. So my thanks to her. Get a better joint with this type , and used angled joins of 1 to 4 and 2 to 3 , depending on best way to save on coving, (1 left inner, 2 right inner, 3 left exterior, 4 right exterior). As i said , interesting learning curve!
Date published: 2021-12-24
Rated 5 out of 5 by from Coving 80mmx2m 6 pack The coving is lightweight, easy to cut and fit and looks great once painted, great price compared to others too.
Date published: 2021-02-08
Rated 5 out of 5 by from Great Coving Really good product, very light and flexible if you live in an old house like we do with walls that are all over the place. I would highly recommend you get a coving mitre block and practice a few times. The coving sands easily so any butt joints can be smoothed out
Date published: 2020-07-17
Rated 5 out of 5 by from Exactly what I needed After trying other products online which disappointed I was so glad I came to Screwfix for an alternative. The coving is lightweight but strong, easy to cut and fit and once painted will finish my kitchen off perfectly and for a fraction of the cost of plaster coving.
Date published: 2020-06-12
  • y_2022, m_9, d_23, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_26
  • loc_en_GB, sid_12010, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 10ms
  • REVIEWS, PRODUCT

Fitting other way

Can this be fitted so that the 80mm is at the ceiling and the shorter length becomes the drop? If so, what is the drop on the shorter length.
Asked by: DIYYYYY
Hello DIYYYYY, Yes, it can be fitted either way up, but the projection across the ceiling and the drop are both the same for this product, 80mm. Thank you for using Screwfix Q&A.
Answered by: JTremain
Date published: 2022-02-10

The product is not symetrical. Which is the ceiling top. The wider edge or the shorter width edge

Asked by: Ant65
Hello Ant65, The ceiling top is the shorter width edge. Thank you for using Q&A.
Answered by: LMARSH
Date published: 2022-02-21

Can this product be used externally?

Asked by: Call5678
Hello Call5678, This is not suitable for external use. Thank you for using Q&A
Answered by: Cwalm
Date published: 2021-08-19

is 80mm the diagonal measurement or the height/projection?

Asked by: FHM13
Hello FHM13, The 80mm is the drop and projection, it measures 177mm on the diagonal. Thank you for using Q&A
Answered by: Cwalm
Date published: 2022-05-01

How far does the protruding bit of the coving come out? There is wood all across top of my wall that comes out about 1-2cm away from the wall.

Asked by: Shan1996
Hello Shan1966, The projection of the coving is 80mm. Thank you for using Q&A
Answered by: SWake
Date published: 2021-02-03
  • y_2022, m_9, d_23, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_22
  • loc_en_GB, sid_12010, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 11ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Brand Essentials
Construction Material (Building) Polyurethane
Length of Pack (Combined) 12 m
Length of Single Piece 2 m
Manufacturer Guarantee 1 Year Guarantee
Pack Size 6
Pieces in Pack/Case 6
Product Height 80 mm
Product Length 2 m
Product Type Sculptured Coving