Screw-Tite PZ Double-Countersunk Thread Cutting Screws 5mm x 70mm 100 Pack (42065)
The only screw that works with all timbers, all modern building materials such as MDF, thin sheet steel, plastics and masonry (pilot hole required).
- Double-Countersunk Head with Underhead Ribs
- Carbon Steel Construction
- Net-Coat Yellow-Plated
- Wax-Coated
- TS Thread System Offers a Single & Twin Thread in One, Gripping Fast with a Firm Fix
- Partially Threaded
View all: Screw-Tite Woodscrews
The only screw that works with all timbers, all modern building materials such as MDF, thin sheet steel, plastics and masonry (pilot hole required).
- Double-Countersunk Head with Underhead Ribs
- Carbon Steel Construction
- Net-Coat Yellow-Plated
- Wax-Coated
- TS Thread System Offers a Single & Twin Thread in One, Gripping Fast with a Firm Fix
- Partially Threaded
View all: Screw-Tite Woodscrews
You may also like:
| Specification | |
|---|---|
| Brand | Screw-Tite |
| Collated/Uncollated | Uncollated |
| Construction Material (Screws) | Carbon Steel |
| Head Type | Double-Countersunk |
| Head Type Description | Double-Countersunk Head with Underhead Ribs |
| Indoor/Outdoor Usage | Indoor |
| Manufacturer Guarantee | 1 Year Guarantee |
| Pack Size | 100 |
| Pieces in Pack/Case | 100 |
| Product Type | Screws |
| Resistant Type | Abrasion-Resistant |
| Screw Coating | Wax-Coated |
| Screw Diameter | 5mm |
| Screw Diameter (mm) | 5 mm |
| Screw Finish | Net-Coat Yellow-Plated |
| Screw Length | 70mm |
| Screw Length (mm) | 70 mm |
| Screw Pilot Hole Requirements | Pilot Hole Not Normally Required |
| Screwdriver Type | PZ |
| Standard | EN 14592. |
| Thread Length | Partially Threaded |