Low pressure
Hi, I have an older model but basically the same, this morning my wife complained that the pressure was low, after a few checks I found the cold outlet pipe was hot, I would be grateful for any of your expert views. Thank you.
Asked by: Heath47
The RP100TU has a built in bypass tube which will allow a small amount of water to transfer through the pump, depending on the model you have this is likely to be the same. This is to ensure that the pump can be used on the hot and cold sides individually, without causing damage to the pump. The only time you should notice this bypassing of the water, is when there is not enough water moving through the pump, i.e. blockage or restriction. Depending on the model of pump, it could be that the pump needs re-toggling. Please contact our technical team with the serial number and we can check to see if the re-toggle process is available on your model and also talk you through the process, it would be best if you could be beside the pump when you call.
Answered by: Julie - Salamander
Date published: 2018-05-26
