Suitable to extend an EV Type 2 Charger lead?
Can this extension lead be used safely with the Masterplug 10A 2.3kW Mode 2 Type 2 Socket Electric Vehicle Charging Cable as this is too short to reach the car. I only actually need an extra 2m so if there's a better alternative let me know please?
Asked by: PIP55
Hi PIP55,
It is traditionally considered best practice to plug an EV lead directly into a hard-wired socket, but as long as the constant power capacity of 13A (3120W / 3.12kW) when fully unwound or 3A (720W / 0.72kW) partially coiled is not exceeded then there shouldn't be any issues with the proposed usage.
Answered by: Pro XT Technical Team
Date published: 2022-05-01
Would this extension lead be suitable and safe to use with a 2kw Electric patio heater ? a e
these are spec details of the patio heater I am considering
Power: 220-240V, 2000W
3 different Heat settings: 650W, 1350W, 2000W
Heating element: Quartz tube
Asked by: travelfan
Hi travelfan,
For a 13A extension the constant power capacity of 13A (3120W / 3.12kW) when fully unwound or 3A (720W / 0.72kW) if partially coiled (neatly), so a 2kW heater should not cause any problems.
We would advise making sure the extension doesn't get anywhere near the emitter head though, as it would be very susceptible to having the PVC sleeving melted if exposed in that way.
Answered by: Pro XT Technical Team
Date published: 2022-05-01
Safe to use inside?
Can this safely be used inside? I run a portable dehumidifier unit outside the bathroom door and bedrooms - 1-3 hrs a day. There's no plug socket close enough. Also it won't be fully unwound, would this still be safe?
Asked by: Rob907
Yes it is IP rated and only a single socket. This means you cannot overload it.
I charge my car which uses the full 3kw for over 20hrs without issue.
Answered by: bleechy
Date published: 2022-03-04
