Rated 1 out of
5
by
Gibbo2054 from
Don’t buy!
After 50 years as a tradesman, this product is absolute rubbish.
My 9 month old grandson has more grip!!!
Date published: 2021-06-14
Rated 5 out of
5
by
PompeyNAS from
Excellent for Thermal Blocks
These plugs are great for use in thermal blocks. I have used them many times, with complete success. After drilling and clearing the 10mm diam hole, I find the best way to insert them is by hand as you get a better feel, using a 10mm socket on the head of the insert tool. I also find smearing a bit of WD40 on the driver blade aids it's removal from the plug after insertion.
Date published: 2021-03-15
Rated 4 out of
5
by
Dazjoiner87 from
Good fixing
Used these to fasten a 2.8m length battern for fixing of a curtain pole. Did the job it needed to do and now supports a pair of heavy curtains.
Date published: 2020-08-25
Rated 2 out of
5
by
farfarman from
Mug not plug
I bought three packs of these plugs and eventually used only 49 plugs from 120. The plugs when you can get them in correctly hold great. The driver provided is basically useless and not robust enough to withstand any obstacles in the block. I tried using the driver in 4 electric drills and even a hand drill but unless a constant slow speed is kept the driver either breaks or twists. I had to slightly countersink the drilled hole otherwise the plug does not sit snug against the block. I used all three drivers and contacted the customer services for Plaplugs and they were useless, sent me a couple of drivers a week later which I tried using and eventually gave up and bought Pfisher plugs to finish the job. A waste of money and time, do not bother buying.
Date published: 2020-08-10
