Masterplug 1 Port 7.4kW Mode 3 Type 2 Plug Tethered Smart EV Charger with 5m Cable Black (150RL)
For customer service enquiries please contact the manufacturer on 03300 249 279. Calls are charged at your local network rate or from your inclusive minutes. Calls may be monitored or recorded for training and quality purposes.
Mode 3 charger with 5m Type 2 cable. Can be connected to Monta App on a smart phone. Ideal for electric vehicle charging at home, workplace, or for fleet service operators. Includes CT clamp.
- Works with - iOS App - Android App
- 230V AC Charging
- 5m Type 2 Tethered Cable
- Integrated DC Fault Protection, Short Circuit & Low / High Voltage Protection
- UV-Stabilised & Weather-Resistant
- IP55
- Must be Fitted by a Qualified Electrician
- IK08 Impact Resistance
- Easy to Install Design
- Hub Not Required
View all: Masterplug Electric Vehicle Charging
Mode 3 charger with 5m Type 2 cable. Can be connected to Monta App on a smart phone. Ideal for electric vehicle charging at home, workplace, or for fleet service operators. Includes CT clamp.
- Works with - iOS App - Android App
- 230V AC Charging
- 5m Type 2 Tethered Cable
- Integrated DC Fault Protection, Short Circuit & Low / High Voltage Protection
- UV-Stabilised & Weather-Resistant
- IP55
- Must be Fitted by a Qualified Electrician
- IK08 Impact Resistance
- Easy to Install Design
- Hub Not Required
View all: Masterplug Electric Vehicle Charging
You may also like:
| Specification | |
|---|---|
| AC/DC Voltage & Charging | 230V AC Charging |
| Brand | Masterplug |
| Cable Entry Points | Bottom & Rear |
| Charging Mode | Mode 3 |
| Colour | Black |
| Communication Protocol | OCPP |
| Compatible with Solar Panels | Compatible with Solar Panels |
| Construction Material (Electrical) | Polycarbonate |
| Current Rating | 32 A |
| Display Type | LED Indicators |
| Domestic/Commercial Use | Suitable for Domestic & Commercial Use |
| EV Plug Type | Type 2 |
| EV Product Type | Stations |
| Fitting Requirements | Must be Fitted by a Qualified Electrician |
| Frequency Band (Smart) | 2.4 GHz |
| Hertz (Hz) | 2.4 G Hz |
| IK Rating | IK08 |
| IP Rating | IP55 |
| Initial Connection Network | WiFi |
| Internet Connection Required | Cloud Control (Internet Connection Required) |
| Manufacturer Guarantee | 1 Year Guarantee |
| Model No | EVCM3ST7B |
| Mount Type | Wall Mounted |
| Network Standards (Full) | Bluetooth & WiFi |
| No. of Bands | Single-Band |
| No. of Phases | Single-Phase |
| No. of Ports | 1 Port |
| Pack Size | 1 |
| Pieces in Pack/Case | 1 |
| Plug Type | Type 2 Plug |
| Power Rating (Watts Kw) | 7.4 kW |
| Power Type | Mains-Powered |
| Product Depth | 130 mm |
| Product Height | 304 mm |
| Product Type | Tethered Smart EV Charger with 5m Cable |
| Product Width | 236 mm |
| RFID Card Included | RFID Card Not Supplied |
| Resistant Type | UV-Stabilised & Weather-Resistant |
| Smart Compatibility | App Controlled |
| Smart Hub Requirement | Hub Not Required |
| Standby Power Consumption | 4 W |
| Switched/Unswitched | Unswitched |
| Temperature Range | -25 to 50 °C |
| Total Product Weight | 3.71 kg |
| Wireless Range Restrictions | Electronic interference from appliances or physical obstruction, such as brick walls, metal frames and floors, can reduce the wireless range. A signal weakens every time it encounters an obstruction. |
| Works with Amazon Alexa | Does Not Work with Amazon Alexa |
| Works with Android App | Works with Android App |
| Works with Apple HomeKit | Does Not Work with Apple HomeKit |
| Works with Google Home | Does Not Work with Google Home |
| Works with Home Assistant | Does Not Work with Home Assistant |
| Works with Homey | Does Not Work with Homey |
| Works with Hubitat | Does Not Work with Hubitat |
| Works with Matter | Does Not Work with Matter |
| Works with Myko | Does Not Work with Myko |
| Works with Samsung SmartThings | Does Not Work with Samsung SmartThings |
| Works with iOS App | Works with iOS App |
| z1 - UK Manufacturer Name | Luceco UK Ltd |
| z2 - UK Manufacturer Postal Address | Luceco Distribution Centre, Stafford Park 1, Shropshire, TF3 3BD |
| z3 - UK Manufacturer Electronic Address | technical.support@luceco.com |
| z4 - EU Manufacturer Name | Luceco SE |
| z5 - EU Manufacturer Postal Address | Luceco SE Distribution Centre, C/ Bobinadora 1-5, Mataró, Barcelona, 8302, Spain |
| z6 - EU Manufacturer Electronic Address | es_ordersretail@luceco.es |
Product Contents
Charger, CT clamp, 5m Type 2 tethered cable, 25mm compression gland, 25mm blind grommet, EPDM fixing washers (5), anti-tamper bit and power connectors.