Mapei Ultraplan 3240 Self-Levelling Compound 25kg (4959F)

Mapei Ultraplan 3240 Self-Levelling Compound is not classed as a wearing surface and is designed to receive floor coverings such as ceramic, porcelain and natural stone tiles, LVT, vinyl sheeting or wooden flooring

Approximately 3 bags would be required.

Mapei Ultraplan renovation screed is not a wearing surface therefore you would need to put something over the top, Tiles, carpet etc before putting white goods on top

Providing the existing vinyl tils are solidly and securely bonded it is possible to apply a smoothing compound over them once they have been thoroughly cleaned, degreased and primed using Mapei Eco Prim Grip. It may be possible to infill the areas where the tiles have been removed, but all the existing adhesive would need to be removed back to a clean solid substrate. Once cleaned and vacuumed and providing the substrate is cementitious based the areas can be primed using Mapei Primer G and once dry infilled using Mapei Ultraplan Renovation screed 3240 finished flush with the surface of the tiles. Once the initial application of the Mapei Ultraplan Renovation screed had dried fully it can be primed using Mapei Primer G and allowed to dry. Mapei Ultraplan Renovation screed 3240 can then be applied over both the in filled areas and the existing tiles that have been primed with Mapei Eco Prim Grip. A alternative option would be of course to remove the existing tiles and prepare the subfloor ensuring all adhesive residues and other contamination is removed. The subfloor can then be vacuumed to remove all dust and debris prior to applying two coats of Mapei Primer G (allowing each subsequent coat to dry). Mapei Ultraplan Renovation screed 3240 can then be applied over the entire area.