Makita

Makita SP6000J1 165mm Electric Plunge Cut Saw 110V (317XJ)

Plunge cut saw with a powerful 1300W input motor, soft start and variable speed control. Electronic speed control automatically applies additional power to the motor to maintain constant speed under load to deliver up to 5200rpm for smooth cutting. Equipped with straight or bevel cutting; the blade enters the material on the same cutting line, with locking lever to hold the blade in position, so that the wrench can be inserted through the hole in the blade for easier installation. Depth adjustment and depth stopper for splinter-free cutting to enable a preliminary groove at a depth of 2mm. Dual front and rear bevel support for precise and accurate bevel cuts and mechanical brake for increased operator safety. Bevel capacity -1-48° with positive stops at 22.5 and 45°. Large cutting capacity (55mm at 90°and 39mm at 45°) and close to wall cutting (only 18mm away from wall).

  • 1800W
  • Max. Cut Depth: 56mm
  • 48-Tooth TCT Blade Included
  • Variable Speed
  • Mechanical Brake
  • Close to Wall Cut: 18mm
  • Dust Extraction Port: 36mm
  • Guide Rails Not Supplied
  • Replaceable Carbon Brushes
  • 1 Year Guarantee
More Info

View all: Makita Plunge Saws

£299.99Inc Vat

Add to basket for...

Add to saved list…

Specification
Bevel Angles-1 - 48 °
Blade DescriptionTCT Blade Included
Blade Diameter165 mm
BrandMakita
BrushlessBrushed
Cable Length4 m
Carry Case/Bag IncludedYes
Corded Tool Weight4.1 kg
Cutting Depth Capacity56 mm
Disc Bore Size20 mm
Dust Extraction Port Diameter36 mm
Manual or PoweredPowered
Manufacturer Guarantee1 Year Guarantee
Max. Cutting Depth At 90deg56 mm
Model NoSP6000J1
No Load Speed2000-5200 rpm
No. of Rails Included0
Number of Teeth48
Pack Size1
Pieces in Pack/Case1
Plug IncludedIncludes Plug.
Power Output (Watts/Kw)1800 W
Power SupplyElectric
Power Voltage Supply110 V
Product TypePlunge Cut Saw
Repair Service ActionShould the product require repair please visit a store who will arrange the repair.

Product Contents

SP6000J/1, TCT saw blade, hex wrench and MAKPAC case.