Hilka Pro-Craft Oxygen Sensor Wrench (2369R)

£ 12.99INC VAT

Add to basket for...

Hilka Pro-Craft Oxygen Sensor Wrench (2369R)

For quick removal or replacement of Oxygen Sensors. Offset drive with wire gate accesses sensor from the side, preventing damage to wire harnesses. Suitable for heated and unheated oxygen sensors. Star shaped socket for accessibility fits standard wrench.

More Info

View all: Hilka Pro-Craft Servicing Tools

£12.99INC VAT

Add to basket for...

Add to saved list...

Save
Rated 5 out of 5 by from Worked very well Used the wrench with higher clearance . (1/2" drive) At first I thought a special star shaped bit was needed, but realised star shape was simply 2 positions to use square 1/2 inch drive. Using a ratchet with a short extension bar, I felt considerable force was being exerted and the sensor duly turned. Sprayed penetrating oil on joint beforehand.
Date published: 2022-04-09
Rated 2 out of 5 by from Works but only just Suppose to be 22mm BUT fit is sloppy. As other reviewers have said the 3/8" socket seems a slightly tighter fit than the 1/2". I used the 3/8 socket which worked but I soaked the sensor in penetrating oil before hand and heated up the surrounding mounting boss with a blow torch just before I attempted removal. Came off fairly easily and with not huge force excerpted by a breaker bar. Cant help but feel that had good force been applied then socket would have slipped on the nut. Poor dimensional control of the product sadly!
Date published: 2022-01-31
Rated 4 out of 5 by from Did the trick This worked - just. It was a good job there were both 3/8" and 1/2" versions included, as I had to try every combination of both types with both sized breaker bars and various ratchets, and it eventually worked with a 1/2" flex head short ratchet. Do to the very limited space available (mini r50) there was not enough room to get any movement with most combinations, even after removing the coil pack which was right in the way. The other style, without the offset square drive, would have had no chance whatsoever. The sockets both fit rather loosely on the sensor, so had to be constantly adjusted and kept square. Pig of a job, couldn't have done it without these - tried with a 22mm spanner first. To be fair, that was loose fitting too! It's almost (?) as if the sensor is in fact 7/8", not 22mm... Not perfect, but did the job.
Date published: 2021-12-17
Rated 3 out of 5 by from Suspect quality They did the job but only by virtue of my lambda sensors not being as seized as they typically are. The longer arm socket was about 1mm too large and could easily ruin the hex on a tight sensor. The shorter arm one was better dimensionally.
Date published: 2021-10-16
  • y_2022, m_8, d_11, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_GB, sid_2369R, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 9ms
  • REVIEWS, PRODUCT

Size

Are both these sockets to fit 22mm sensors? Or are they for different sizes, in so, which, please? Thanks.
Asked by: DIYDaveHgate
Hello, thank you for the question. I can confirm both sockets are 22mm. One is 3/8" and the other 1/2" fitment. Regards, Hilka Tools
Answered by: Hilka Product Expert
Date published: 2021-07-16

How many pieces?

Picture shows two pieces but description says one piece inluded, can you please confirm if it is two pieces as per the picture?
Asked by: Charles35
Hello, thank you for the question. I can confirm this is a two-piece set packaged together as one unit. Regards, Hilka Tools
Answered by: Hilka Product Expert
Date published: 2018-03-11

What size of ratchet drive are these sockets for?

Asked by: Mechanic2121
Hello, thanks for your query. This product has a star shaped socket for accessibility fits standard wrench. Contains: 3/8" Dr. x 22mm and 1/2" Dr. x 22mm.
Answered by: Hilka Product Expert
Date published: 2022-03-23
  • y_2022, m_8, d_11, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_GB, sid_2369R, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 8ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Brand Hilka Pro-Craft
Manufacturer Guarantee 1 Year Guarantee
Pack Size 1
Pieces in Pack/Case 1
Product Type Oxygen Sensor Wrench