Hilka Pro-Craft Hoist Support Arm 600kg (2240R)

Hello, thank you for the question. These items have a Declaration of Conformity available and have the ratings on the label plates. They do not have a specific SWL sticker though. Under LOLER there may be specific requirements if using on a site however this can only be completed by the end user and not manufacture. Regards, Hilka Tools

Hello, thank you for the question. The max lifting length refers to how far along the beam the hoist can be connected to (at the furthest point of the hoist). From the point it is connected it will allow up to 750mm of distance away from the connection point. This will allow for overhang if required to clear obstetrical. Regarding lifting something from ground floor to second / third floor this will depend upon the hoist you use. our 500kg hoist (Screwfix code 72809) has a lifting height of 12 metres at 250kg or 6 metres at 500kg. Regards, Hilka Tools

Hello, thank you for the question. To clarify the support arm is suitable for use with 48mm Scaffolding Tubes. The dimensions of the square mounting brackets that come with the hoist are 4.6cm wide by 4.5cm high. Hope that helps. Regards, Hilka Tools

Hello, thank you for the question. The support arm does not swing once fixed in place. Regards, Hilka Tools

Hello, thank you for the question. This pole is designed to be extended horizontially not vertically from scaffolding. The pole has a reach of 750mm with distance between the mounting points being 380mm. I hope that answers your question but if not please let me know. Regards, Hilka Tools