Henderson Sliding Door Soft Stop (1301J)

£ 56.96INC VAT

Add to basket for...

Henderson Sliding Door Soft Stop (1301J)

Sliding door soft stop which gently decelerates a door and pulls it into its final position, preventing slamming and improving overall product longevity. For use with Henderson Husky 100 and Pocket Door systems. System is easy to fit with no special tools required. Can be retrofitted to existing Husky systems and for bi-parting doors, 2 kits can be used.

  • Max. Load: 50kg
  • Min. Load: 20kg
  • Easy to Fit
  • Smooth & Silent

More Info

View all: Henderson Wardrobe Fittings

Bulk Save Save up to 10%
Bulk savings
QTY Price per item Saving
1 - 2 £56.96 -
3 - 4 £54.10 Save 5%
5 + £51.25 Save 10%
£56.96INC VAT

Add to basket for...

Add to saved list...

Save
Rated 3 out of 5 by from Let down by instructions Well made and works well but the fitting instructions are very difficult to follow. What should be a simple job is made hard by inadequate small diagrams and insufficient explanation. As someone else has commented, the clearance dimensions are tighter than the ones given for the doors so you have to fit the doors to these and not those given in the door instructions. Quite expensive for what you get, but quality seems very good.
Date published: 2019-01-30
Rated 4 out of 5 by from Sliding Door Soft Closers These work fine but are a little noisy. Take car with the measurements. Instructions for the Henderson Husky 100 track say the measurement from the 'top of track bracket to top of door' must be 80 to 88 mm but to fit these soft closers the measurement must be 85 to 88mm otherwise there is not enough space to fit them between the track and the door. As you tend to put the track up first and then install the softclosers it is easy to make a mistake.
Date published: 2018-12-10
  • y_2022, m_9, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_GB, sid_1301J, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 120ms
  • REVIEWS, PRODUCT

Can you install this on a PDK3 system on the closed off end (soft opening) once plasterboard?

Asked by: AlecP31
Unfortunately you cannot retrofit a soft close to the Pocket Door kit. This requires an alternative track to be installed and would require the full system to be reinstalled.
Answered by: P C Henderson
Date published: 2022-04-16

Is this compatible with PDK3 Door Kit?

If so, is it possible to retri fit this kit to a previously installed PDK3 Kit?
Asked by: PhilW68
Hello, Yes the soft stop is compatible with the pocket door kits. Regards John P C Henderson Ltd
Answered by: P C Henderson
Date published: 2021-10-15

Is there ANY information available on how this kit is used, for the purpose I bought it?

I bought this kit to go with a pocket door kit PDK3, and I can find no intelligible information on how it's fitted. The miniscule leaflet which came with the kit just adds to the confusion.
Asked by: Dav1d
Good afternoon, Fitting instructions for the soft close should have been included in the kit to guide you through the installation. I have copied a link below for your reference. www.pchenderson.com/wp-content/uploads/2021/01/669168-Husky-50-Soft-Stop-Fitting-Insructions-Nov-2019-LVL06.pdf Many thanks, P C Henderson
Answered by: P C Henderson
Date published: 2021-03-07

What is the facia/ cover made from and what is the finish

Asked by: Kevkingkong
Good afternoon, The soft stop cover is made from aluminium. In most applications the soft stop will be concealed. Many thanks, P C Henderson
Answered by: P C Henderson
Date published: 2021-01-25

Is this suitable for use with PDK1 kit?

Asked by: Dav1d
Good afternoon, This soft stop is suitable for use with our standard Pocket Door Kit catering for doors between 762mm and 930mm wide. Thanks, P C Henderson
Answered by: P C Henderson
Date published: 2021-01-13
  • y_2022, m_9, d_29, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_GB, sid_1301J, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 137ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Brand Henderson
Fixings Supplied Fittings Supplied
Manufacturer Guarantee 1 Year Guarantee
Max Load Capacity 50 kg
Pack Size 1
Pieces in Pack/Case 1
Product Type Sliding Door Soft Stop

Product contents

Damper (1), block (1), brackets (2), fascia (1) and fixings.

Downloads

Instruction Manual