FloPlast Push-Fit Pipe White 32mm x 3m (26334)

£ 2.28INC VAT

Add to basket for...

Not available for delivery

FloPlast Push-Fit Pipe White 32mm x 3m (26334)

A 32mm push fit waste pipe. Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening.

  • Polypropylene Construction
  • No Solvent Welding or Tightening Required

More Info

View all: FloPlast Push Fit Waste

Bulk Save Save up to 10%
Bulk savings
QTY Price per item Saving
1 - 3 £2.28 -
4 - 7 £2.16 Save 5%
8 + £2.05 Save 10%
£2.28INC VAT

Add to basket for...

Not available for delivery

Add to saved list...

Save
Rated 5 out of 5 by from just what I required. going to use these to build an enclosure at my allotment .
Date published: 2021-06-17
Rated 5 out of 5 by from Great price Great price, did the job even though I only needed 25cm of 3 metres
Date published: 2021-05-14
Rated 4 out of 5 by from Bit too long Its a white pipe ideal for plumbing. Takes lick of gloss to protect from sunshine. If you have a smallish car like me, take saw to trim bit off on collection.
Date published: 2021-04-24
Rated 5 out of 5 by from Best value Clean, straight pipe, accessories fit well. Cannot comment on longevity as yet but hope it will not go brittle in the sunlight. Looks good value.
Date published: 2021-04-03
  • y_2021, m_6, d_22, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_81
  • loc_en_GB, sid_26334, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 17ms
  • REVIEWS, PRODUCT

Can this pipe be used with solvent and 32mm solvent couplers if desired?

Asked by: BrettG
This pipe is push-fit only, push-fit and solvent weld systems should NOT, and cannot be mixed as they are physically different sizes, although are both marketed as a nominal 32mm.
Answered by: FloPlast Ltd Tech Team
Date published: 2019-09-28

max temp

what is the maximum temperature of waste water that this pipe can take? does it differ from the plastic used for solvent weld?
Asked by: AKI1990
The solvent weld and push fit waste systems have very similar temperature ratings. They can withstand short discharges of up to 100 degrees for up to two minutes. For discharges over two minutes the maximum temperature is 76 degrees.
Answered by: FloPlast Ltd Tech Team
Date published: 2020-03-22

is 32 mm external or internal? If internal, what is external?

Asked by: beanss
32mm is a nominal size. There is a tolerance allowed within the pipe dimensions so the internal diameter is between 29.6mm - 31.2mm and the outside diameter is between 34.4mm - 34.8mm.
Answered by: FloPlast Ltd Tech Team
Date published: 2020-11-09

is this pipe suitable for 32mm compression fittings as well as pushfit?

I'm assuming it must be as there is no other waste pipe listed except solvent weld?
Asked by: Infidel
Yes, the push fit pipe will also connect to compression fittings.
Answered by: FloPlast Ltd Tech Team
Date published: 2020-10-16

Possible weight inaccuracy in spec list for 32mm x 3m push fit waste pipe.kg.

Product 26334 (1 piece) shows a weight of 6.23kg. Product 19046 (10 piece) shows a weight of 6.26kg. Are these weights correct? If they are not, please could you advise the correct weights. Thank you.
Asked by: Jodily
The product weight for a single item is slightly variable due to the SG of the material, however in general a single item should have a nominal weight of around 0.628Kg.
Answered by: FloPlast Ltd Tech Team
Date published: 2020-05-13
  • y_2021, m_6, d_22, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_GB, sid_26334, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 29ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Brand FloPlast
CE Standard (Tested to EN...) EN 1451.
Colour White
Connection Type Push-Fit
Construction Material (Plumbing) Polypropylene
Length of Pack (Combined) 3 m
Length of Single Piece 3 m
Manufacturer Guarantee 1 Year Guarantee
Model No WP01
Pack Size 1
Parent Colour White
Pieces in Pack/Case 1
Product Diameter 32 mm
Product Length 3 m
Product Type Pipe