40mm plastic pipe to 40mm elbow
If I measure my plastic 40mm pipe, it is 41.3mm
If I measure the inside of the 40mm elbow it is 43.78mm, with such a big jab will these joints glue together with out leaks please.
Asked by: Anonymous
this sounds as though you have push fit waste pipe, are you able to see any markings on the pipe? does it say PP anywhere? This will not mix with the larger solvent weld fittings. You will either have to change your pipe, or use push fit fittings.
Answered by: FloPlast Ltd Tech Team
Date published: 2020-05-05
40mm elbow
why does the 40mm elbow says 43mm on it and does the 40mm pipe fit
Asked by: hiah
The nominal size of this system is 40mm but the actual outside diameter of the pipe is 43mm. The system is sold as 40mm so as long as you have 40mm solvent weld pipe then yes, it will connect.
Answered by: FloPlast Ltd Tech Team
Date published: 2019-05-04
What size pipe is this for
The inside diameter of the fitting is 38mm. So what size pipe is this fitting designed to fit on?
Asked by: stopwiththenicknamesthing
This bend is designed to connect to 40mm solvent weld pipe. The inside diameter of the pipe should be 38mm and the inside diameter of the fitting should be 43mm.
Answered by: FloPlast Ltd Tech Team
Date published: 2018-12-23
Can we use these fittings (and all FloPast products) outside without them yellowing ie are they UV-stable?
Asked by: Frustratedbuilder
The FloPlast ABS fittings are not UV stable and should be wrapped if they are going to be used externally.
Answered by: FloPlast Ltd Tech Team
Date published: 2016-10-05