Flomasta PTFE Liquid 50g (5321J)
You must be 18 years old or over to buy this product.
Part anaerobic adhesive with PTFE liquid for use with all metal threads in hot and cold water, gas and compressed air systems. Cures rapidly sealing gaps to 0.3mm. Solvent and water-resistant once cured. Easy to disassemble with hand tools. Prevailing torque: 15-20Nm. Breakaway torque: 20-28Nm.
- Solvent
- Water-Resistant
View all: Flomasta Sealers & Compounds
You may also like:
| Specification | |
|---|---|
| Brand | Flomasta |
| Label Info 1: Signal Word | Warning |
| Label Info 2: Hazard Statements | H315 Causes skin irritation.H319 Causes serious eye irritation.H317 May cause an allergic skin reaction.H335 May cause respiratory irritation. |
| Label Info 3: Precautionary Statements | P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P103 Read carefully and follow all instructions.P261 Avoid breathing dust/fume/gas/mist/vapours/ spray.P264 Wash … thoroughly after handling.P271 Use only outdoors or in a well-ventilated area. |
| Label Info 5: Hazardous Chemical Content | 2-hydroxyethyl methacrylate |
| Manufacturer Guarantee | 1 Year Guarantee |
| Pack Size | 1 |
| Pieces in Pack/Case | 1 |
| Product Type | PTFE Liquid |
| Temperature Range | -50 to 150 °C |
| Volume | 50 g |