Egg and Dart coving. Does it require nailing to fit
Does the fitting process require the following.
1. Scribe a pencil line on ceiling and wall, where the edges of the coving will sit
2. Put adhesive on coving then squish it in place
3. Does it require nails to hold it in place until the adhesive sets?
Asked by: DIYnovice73
Hello,
This coving needs to be attached to the wall/ceiling with an adhesive.
For example SUPERCOVE SUPERCOVE COVING ADHESIVE WHITE 310ML (28537).
Its usually a good idea to scribe/mark out lines on the wall for where the coving edges will sit, as this helps to keep everything level.
There are lots of videos and guides online which show how coving should be installed. You might want to take a look at some to give you a better idea about how coving is installed and what is required.
Alternatively you might want to seek advise from a competent tradeperosn.
Thanks for using Q&A. [DG]
Answered by: DGIFF
Date published: 2020-09-28
