CLICK & COLLECT in as little as 1 minute
NEXT DAY DELIVERY 7 Days per week
794 Stores Nationwide find your local store

View All Summer Deals

British General IP66 13A Weatherproof Outdoor… (27437)

£ 16.29INC VAT

Add to basket for...

Check stock in your local store

British General IP66 13A Weatherproof Outdoor Switched Fused Spur & Flex Outlet with Neon (27437)

Weatherproof and dust-tight. Manufactured from robust, impact-resistant polycarbonate with multiple gland entry positions.

  • IK06 Impact Resistance
  • Polycarbonate Construction
  • Backed-Out Captive Terminal Screws
  • Side & Base Knockouts
  • Neon Power Indicator

More Info

View all: British General Outdoor Fused Spurs

£16.29INC VAT

Add to basket for...

Check stock in your local store

Add to saved list...

Save
Rated 5 out of 5 by from Great product Good quality, easy to install and plenty of knockouts.
Date published: 2022-03-28
Rated 2 out of 5 by from Hope the fuse doesn't blow Seems to be fairly well built but if the fuse blows you have to open up the box by turning the power off, removing the screw covers and screws and the removing several of the screws that hold the front plate in before you can access the fuse holder. Not something that a user should have to do. I cannot comment on reliability as it has only recently been fitted but would only recommend if you know your fuse is unlikely to blow and the user is likely to know to turn the power off before sticking a screwdriver in the back - otherwise look elsewhere.
Date published: 2022-02-18
Rated 5 out of 5 by from British General IP66 Spur Good quality, easy to install and plenty of knockouts. Knockouts a bit more of a pain to use for 25mm conduit that 20mm.
Date published: 2021-11-07
Rated 5 out of 5 by from Good Kit Robust and easy to fix in place with good terminals. Plenty of knockouts to suit all needs. Only problem was when I changed the fuse, I had difficulty getting the fuse carrier to reseat. Couldn't figure out why.
Date published: 2021-11-02
  • y_2022, m_8, d_13, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_43
  • loc_en_GB, sid_27437, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 111ms
  • REVIEWS, PRODUCT

Need to replace switched fuse unit

Need to replace the switched fuse unit as the switch has gone on the one currently installed. Can you please advise on the replacement unit without the IP cover.
Asked by: CheekyLFC
Hi CheekyLFC, This weatherproof IP66 rated enclosure contains our Nexus Moulded fused connection unit, code:- 853 (or an iteration of it, but they are dimensionally identical including the profile, so it will fit).
Answered by: Luceco Technical Team
Date published: 2022-07-31

Can I remove the 13 amp switch and unit and replace it with a different switch and unit as I want to use the IP 66 box with see through cover for a different switch?

Asked by: Switchmania
Hi Switchmania, The switch is retained simply by 4 flange-headed screws pushing against the rear of the faceplate, so is easily removeable, but you should be aware that the design of the enclosure is for a plate 10mm deeper than is normal for our 800 series moulded range and it is profiled specifically for that range (using a shallower plate will result in the membrane _not_ being firmly retained).
Answered by: Luceco Technical Team
Date published: 2022-05-28

Wiring this unit up

I have wired this fcu but the light is on when the switch is in both the on or off position. Have I incorrectly wired it up.
Asked by: Garden12345
Hi Garden12345, The indicator light is connected directly to the Load (output) L and N terminals, so it sounds like you have wired your permanent feed from the distribution board into these terminals by mistake (hence putting the indicator before the switch mechanism, permanently powered).
Answered by: Luceco Technical Team
Date published: 2021-09-25

Does this unit allow for a cable to enter/exit through the back?

Asked by: Hazrold
Hi Hazrold, Yes, there is a rear entry point which can be drilled or cut out to 20 o5 25mm diameter and has a moulded double-ring surrounding it on the outside so you can run a bead of sealant around to prevent leakage between the mounting surface and the enclosure.
Answered by: Luceco Technical Team
Date published: 2021-08-27

How do you fit a 3 pin point plug to this

Asked by: RexSGiles
Hi RexSGiles, This is a hard-wired outdoor Fused Connection Unit, designed to be connected directly to the mains wiring in your property, so we wouldn't expect it to be fed via a plug usually (although you can if you really want to).
Answered by: Luceco Technical Team
Date published: 2021-08-08
  • y_2022, m_8, d_13, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_GB, sid_27437, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 88ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Amp Rating 13 A
Brand British General
Colour Grey
Construction Material (Electrical) Polycarbonate
Fixings Supplied Fixings & Fittings Not Supplied
IK Rating IK06
IP Rating IP66
Knockout Size 20 mm
Manufacturer Guarantee 1 Year Guarantee
Model No WP54
No. of Earth Terminals 2
Number of Gangs 1 Gang
Number of Poles Double Pole
Pack Size 1
Parent Colour Grey
Pieces in Pack/Case 1
Power Voltage Supply 240 V
Product Depth 90 mm
Product Type Fused Connection Unit
Switched/Unswitched Switched
Temperature Range -20°C to 40 °C
Terminal Capacity Terminals accept 3 x 2.5mm², 2 x 4mm² or 1 x 6mm² cables
With Flex Outlet Flex Outlet
With RCD Without RCD