What is the approx. PCD of the fixing holes please.
I have a standard horizontal flue from a Baxi boiler, around the hole in the wall is a stainless steel finishing collar approx. 125mm o/d, would the fixing holes for the guard be outside that collar?
Asked by: DoItDreckly
Good Morning DoltDreckly, yes the fixing holes are situated on the outside of the cage please refer to the installation instructions of the boiler and under the flueing section there is a picture that shows the fixing. Please click on the link to Baxi to find your specific boiler. Kind Regards Wendy at Baxi. https://www.baxi.co.uk
Answered by: Purdie at Baxi
Date published: 2020-01-18
What size is this ?
The specifications say Product Diameter 60/100 mm
Product Length 100 mm
but it looks like BAxi 720644601 Plume Kit Intake Guard 215 x 260mm (7912G)
Same number of rows of wire
Asked by: Senat0r
Thanks Baxi, but can you still confirm the dimensions - the depth in particular.
Thanks
Answered by: Goofer
Date published: 2019-07-19
As per the description, the TERMINAL GUARD covers the terminal end of a standard horizontal flue, which is a legal requirement if a flue falls within a legal height limit outside the property. Then what is the legal height limit please?
Asked by: VS2018
Good Afternoon VS2018, Any flue terminal that is less than 2 metres above finished floor or ground level must be guarded. This also applies when terminals are positioned above flat roofs and balconies to which there is regular unimpeded access. Hope this helps. Kind Regards Wendy at Baxi
Answered by: Purdie at Baxi
Date published: 2018-07-08