The description says it is 2-way, but it only appears to have one wire entry.
Thank you for your question.
The 224-101 are designed for lighting applications. There are two cable entries on this connector.
The round hole is a Push-Wire entry; suitable for solid core cable from 1 to 2.5mm². Strip the solid conductor 9 -11 mm and then push into the round hole.
On the other end of the connector is a square hole, this is a squeeze together entry. This is suitable for 0.5 – 2.5mm² solid of fine-stranded (flex) conductors. Strip the conductor 9 -11 mm, squeeze the housing together opening the clamp, then insert the conductor fully, then release the housing.
If you are in any doubt, please contact WAGO.
Answered by: WAGO Product Expert
Date published: 2021-09-15