How do I fit a PIR sensor to a light circuit and switch that is connected using the surewire box? Is this possible
Hi, The PIR Senor is effectively a switch and therefore can be connected to the switch connection on our box. This would be where the PIR only operates the light.
If a switch is to be fitted as well to have a permanent light on at times when required then wire to our box as normal for the switch, but a link between the switch cable live and switch live (neutral) cables must be made with the PIR before the connections into our box. This will enable the switch to be used when required and when switched off the PIR will then take over and operate the light. Thank you.
Answered by: Surewire
Date published: 2017-11-12