Redring MS6 Undersink Stored Water Heater 1.5kW 6Ltr (5314P)

£67.99INC VAT
Was £79.99 Save £12.00 (15%)

Add to basket for...

Redring MS6 Undersink Stored Water Heater 1.5kW 6Ltr (5314P)

Compact stored water heater, an efficient way to add a hot water supply where a connection to a central supply is either not possible or practical. Perfect for supplying a sink or basin with hot water set between 22°C and 75°C in kitchens, extensions, loft / room conversions or annexes. Quietly and efficiently heats 6Ltr of cold water at 8°C up to 75°C in just 15 minutes, providing hot water for a variety of uses. Compact size for unobtrusive wall-mounting or floor installation in a cupboard. Easy installation requires a mains cold water feed (max. 8bar pressure) and a 13A plug socket. Heating indicator light and front-mounted thermostat control to select required water temperature. Stainless steel tank with high efficiency "blue diamond" enamel glass lining to prevent corrosion. Accepts 15mm compression or push-fit connections. IPX4 splash-rated for bathroom use. Supplied with di-electric connectors, push-fit adapter and pressure relief valve.

  • Suitable for Cold Mains Supply Only
  • Wall-Mounted
  • Adjustable Maximum Temperature Stop
  • Stainless Steel Body
  • Mains-Powered
  • Overheat Protection
  • Energy Rating: C
  • 1 Year Guarantee
  • Stainless Steel Tank with Enamel Glass Lining
  • Front Thermostat Control

More Info

View all: Redring Water Heaters

£67.99INC VAT
Was £79.99 Save £12.00 (15%)

Add to basket for...

Redring MS6 Undersink Stored Water Heater 1.5kW 6Ltr is rated 4.4 out of 5 by 9.
  • y_2019, m_1, d_18, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_GB, sid_5314P, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 25ms
  • REVIEWS, PRODUCT

Add to saved list...

Save
Rated 5 out of 5 by from Fuss free hot water. I bought this water heater to supply hot water to a studio kitchen area that I built in the garden for my wife, unit is compact and very easy to fit under the sink unit,easy to follow instructions and simple to operate. Switch on and select desired temperature, it heats the water very quickly and stores 6litres in its tank and maintains it at the desired temperature. We have only used it to wash hands and paint brushes etc and have not noticed the supply running out though have not tried filling a whole sink full. Ideal for our usage and for cloakrooms / utility rooms.
Date published: 2018-12-09
Rated 5 out of 5 by from Nice bit of kit Bought to replace old broken one. Easy to fit and test, water is hot very quickly. Tidy fit and out of the way.
Date published: 2018-12-06
Rated 1 out of 5 by from Very inconsistent As the unit is so inconsistent, the assumption is as follows: The thermostat obviously sits quite high up in the unit. (The point at which it measures the water temperature in the tank / unit) The thermostat On/Off temperatures are obviously very different. (If you set a thermostat at say 60°, a typical thermostat would only switch on at maybe 54° or so, and off again at 60°) The result is very inconsistent hot water supply, as follows. If the unit has not been used over night, or for any extended period, the water below the thermostat cools down, (As there is no movement, the difference between hot and cold water is quite linear), and as the top "part" of the water is still above the lower On value of the thermostat, the user is only left with a minimal amount of water colder than what the temperature is actually set at. As this unit has a small capacity, (now made smaller due to the above), it is inconsistent and not practical to be set up as above(typical setup). If at this point the user uses some "warm" water, and the thermostat eventually reads below its On value, the water will heat up to "60°" at thermostat position, but because there is thermal activity in the water, the effective line between hot and cold water is mixed up as such, so more of the cold water gets affected by the heating than when it was allowed to stand overnight with no movement in the tank. (Not a practical solution to a small volume water heater)
Date published: 2018-11-11
Rated 4 out of 5 by from Does the job Two things to note..... The fittings are 1/2"BSP, not compression The internal insulation obstructs the bracket prongs and has to be pushed back. Too soon to judge reliability
Date published: 2018-08-24
  • y_2019, m_1, d_18, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_GB, sid_5314P, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 18ms
  • REVIEWS, PRODUCT

Can this unit be fitted at high level above the hot water outlet.

Asked by: Robnkim

What outlet pressure does it have+what max temperature is it on the outlet?

Asked by: Jimbo5499

It says' mains cold supply only' but can it be fitted to a campervan for use with a mains electrical hook up and water from an on-board cold tank?

Asked by: Steamdrivenandy

If this item is design to fit directly under sink, where would the expansion tank go? would it need an expansion tank?

Asked by: Bladon

Can the unit be left switched on all of the time

Asked by: Bironic
  • y_2019, m_1, d_18, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_20
  • loc_en_GB, sid_5314P, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 12ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Brand Redring
Connection Type ½" BSP
Energy Rating C
Fixings Supplied Fixings Supplied
IP Rating IPX4
Litre Capacity 6 Ltr
Manufacturer Guarantee 1 Year Guarantee
Maximum Bar Pressure 8 bar
Minimum Bar Pressure 1 bar
Model Name CB6L
Model Name/No MS6
Mount Type Wall-Mounted
Pack Size 1
Pieces in Pack/Case 1
Power Output (Watts/Kw) 1.5 kW
Power Source Mains-Powered
Power Voltage Supply 230 V
Product Depth 255 mm
Product Height 270 mm
Product Type Undersink Stored Water Heater
Product Width 270 mm
Suitable System Suitable for Cold Mains Supply Only
Tank Capacity 6 Ltr
Temperature Control Type Adjustable Maximum Temperature Stop
Total Product Weight 4.7 kg
Water Entry Points Top Only
Water Heater Application Universal Water Heaters
Water Heater Location Undersink
Water Heater Product Type Electric Water Heaters

230V. W x D x H: 270 x 255 x 270mm. Suitable water pressure: 1-8bar. Water entry point: Top Only. Connection type: ½" BSP. 1.5kW Power Output. IPX4. Fixings Supplied. Weight: 4.7kg.

Product contents

Stored water heater, di-electric connectors, pressure relief valve and 1m mains cable with 13A plug.