What weight can these hold up to?
I'm wondering if they'll do the job for a 12kg mirror?
Asked by: PVFriday
You can find the load values on the data sheet for this product. https://www.rawlplug.co.uk/product/4all-universal-plug/
Say for instant in Plasterboard min. 12.5 mm. For Ø8, Embedment depth 40mm. The Recommended Load is 0.05 kN or 5kg.
Answered by: RawlplugAcademy
Date published: 2022-01-16
Is this product suitable for a solid brickwall when used with a masonry drill?
I'm hanging an "architectural sculpture", about 5kgs onto a brick wall. The diameter of the eyelets of the hanging hole on the back is just less than 8mm (5/16 inch.)
Can you recommend the appropriate rawlplug and screw for this job?
Asked by: GGGD
Yes this product is more than strong enough to support a 5kg sculpture into brickwork.
You will need to use a 6mm diameter by 60mm long screw with this product. Meaning the screw will fit into the hole less than 8mm. Just ensure the screw head will be big enough to support the bracket into place.
You can find the technical data sheet on our Rawlplug website.
https://www.rawlplug.co.uk/product/4all-universal-plug-with-screw/
Here it shows the dimensions and the loads this product can withstand.
Answered by: RawlplugAcademy
Date published: 2022-03-26
Tv bracket hanging
I am about to hang a tv wall bracket for a 44” tv using M6x55mm coach screws,are these wall plugs suitable,The wall is single skimmed plaster board with 8” insulation board behind ,
Thanks in advance.
Asked by: Medowfield
The specification say: Suits Screw Diameter 4-5 mm.
But a 6mm diameter screw would fit as well into this. 55mm length should be fine as well. As long as the screw is not shorter than 50mm. If the screw is too short then it would not be able to catch into the thread as the bottom of the plug.
Answered by: RawlplugAcademy
Date published: 2022-03-26