Liberon Knotting Solution Pale 250ml (5343F)

250ml. Helps to prevent seepage from knots in resinous woods prior to painting, as well as minimising discolouration of paint finishes. Pale in colour and may be used with clear varnish finishes.

More Info

View all: Liberon Knotting Solution

£8.79INC VAT (£35.16/Ltr)

QTY

Add to basket for...

Check stock in your local store

Add to saved list...

Save

Rated 5 out of 5 by Velvetedge from Simple and easy Bought for pine skirting. Applied with brush and dries virtually invisible. Instructions say one coat, but my timber is not best the quality so will probably use a second coat.

Date published: 2020-05-21

Rated 5 out of 5 by Dynevor from Knotting Solution 4 Soft Wood I needed some more Knotting Solution which I always use when making items with Soft Wood which tends to have knots and be resinous. This product stops the resin leaching through to discolour the paint.

Date published: 2020-05-13

Rated 5 out of 5 by JFPB from Knotting Works very well on unfinished pine furniture. Applied by brush and barely noticeable when dry.

Date published: 2020-03-17

Rated 5 out of 5 by Claire43 from As expected ! Easy to use with a brush, soaked into wood so no need to rub down afterwards ,dries clear Would recommend

Date published: 2020-03-03

Liberon Knotting Solution Pale 250ml Reviews - page 2

Can this be used prior to using a oil based paint?

Would this be subtle for pine cladding prior to being finished with a high gloss?

Asked by: Sjdheb

How do I clean my brush after application?

There is no information on either of the instruction or safety data sheet downloads

Asked by: bogoff

You can clean brushes in Meths as stated in the instruction sheet, personally, I would either use a throwaway brush or make a hole in the cap and leave the brush permanently in the knotting, this keeps the brush usable and always to hand. You just lower the brush as the level of the knotting goes down, had a bottle for years with the same brush!

Answered by: Bossman

Date published: 2019-04-20

Can I overcoat with a water based paint?

Asked by: Allsummerbingardening

Can you use this product with water based paints?

Asked by: Ethan01

Can I apply This product onto existing exterior(Valspar) paint?

I have resin-bleed- through coming through after applying a Universal Undercoat primer - white and two coats Valspar White Emulsion exterior paint.

Asked by: Chipee

Specification
Brand	Liberon
Coating & Finishing Type	Natural Finish
Colour	Pale
Label Info 1: Signal Word	Danger
Label Info 2: Hazard Statements	H225 Highly flammable liquid and vapourH319 Causes serious eye irritation.H336 May cause drowsiness or dizziness.
Label Info 3: Precautionary Statements	P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P271 Use only outdoors or in a well-ventilated area.P501 Dispose of contents/container to …
Label Info 4: Supplementary Label Info	The mixture does not contain substances classified as ‘Substances of Very High Concern' (SVHC) = 0.1% published by the European CHemicals Agency (ECHA) under article 57 of REACH: http://echa.europa.eu/fr/candidate-list-table The mixture satisfies neither the PBT nor the vPvB criteria for mixtures in accordance with annexe XIII of the REACH regulations EC 1907/2006.
Label Info 5: Hazardous Chemical Content	603-064-00-3 MONOPROPYLENE GLYCOL METHYL ETHER 607-025-00-1 N-BUTYL ACETATE 603-117-00-0 PROPAN-2-OL
Liquid Base	Solvent-Based
Manufacturer Guarantee	1 Year Guarantee
Pack Size	1
Parent Colour	Clear
Pieces in Pack/Case	1
Product Type	Knotting Solution
Volume	250 ml