Leyland Trade Undercoat 5Ltr (63095)

Thank you for your enquiry, although it can be spray applied, it is imperative that all appropriate safety aspects are followed when undertaking such a process. Protect yourself and your surrounding area. If spraying it will allow a small amount of thinners, but no more than 5%.Ideally brush and roller are the preferred option if the appropriate safety measures can’t be guaranteed.

Hello gordo2022 We would advise a foam roller for oil/solvent based coatings - short pile microfibre rollers can be used, but if you are not confident in decoration, they can apply more paint, and cause knock on issues. For water based trim finishes we only recommend short pile microfibre rollers. Thank you

Hello Castgreen Ideally you need to use a separate primer first, you could dilute the coating using white spirit. Dilute by up to 10% using white spirit, and use that as a primer, once dry, use the product undiluted as an undercoat. There is a faster drying low odour alternative in Acrylic Primer Undercoat, if odor and drying times are important to you. Thank you

Hello Nina Unfortunately, the success of decoration is always down to the preparation. We can only guarantee the product will behave as we expect, if the surface preparation is undertaken. Thank you

Hi There Use White Spirit or an alternative to White spirit.