Leyland Trade Fast Drying Paint Brilliant White 2.5Ltr (88133)

Hello BozzaaNo10 Yes this is both internal and external - ensure to use the Leyland Trade Fast Dry Undercoat with it. Thank you

Hello Fjggb Water based Satins are not self undercoating, unlike their oil/solvent based counterparts, so the waterbased undercoat is required. Thank you

Hello Walps Yes, however i would suggest using the Fast Dry Undercoat also, as that will aid adhesion. Apart from that, a good clean, degrease and very light abrade. One other point, would be to spot prime, using an anti corrosive primer, any bare metal. Thank you

Hello David We do not manufacture a product that can be applied over varnish, our suggestion is to fully remove the varnish. Thank you

Hello Nn10 Yes, you would require the Leyland Trade Fast Dry Undercoat as well as the chosen Fast Dry Satin or Gloss. Most untreated pine is quite knotty, so utilise a knotting solution on those areas, once dry, the timber is ready for priming. Dilute an amount of the Fast Dry Undercoat (10% or 100ml water per litre of paint) apply this to the timber and allow to dry. The timber will fur up slightly, so abrade using an appropriate grade of sandpaper, take care not to remove the coating. Once this is done, simply apply an undiluted coat of the Fast Dry Undercoat, and allow to dry. Again lightly abrade to create a key, and a smoother surface. Once dry apply your chosen Fast Dry top coats. Thank you