Leyland Trade Eggshell Paint Brilliant White 2.5Ltr (71841)

Hello Saddlers1888 Given this is a solvent based product we urge you to take all the correct precautions, wearing the correct PPE and RPE. The paint will go thorugh the machine with no issues, there are two main points; Health and safety is paramount, so ensure good ventialtion and circulation, and the PPE. The second is airless machines (depending on machine) can have 15 metres of hose, where you are obviously carrying alot of wet material - this can take a lot of cleaning. Given the power of airless machines, thinning to certain viscosity levels is less important than for HVLP machines. The maximum dilution amount is 10% - 100ml white spirit per litre of paint, this is the extreme and would add 2.5% at a time, small amount to these products make a big difference. I hope this helps. Thank you

Hello Pissedoff No, it is an interior only product. Thank you

Hello Els2 It all depends on the quality of the MDF, most pre primed will require a light sand, especially to formed areas where the grain is naturally rougher. The primer used on the pre primed MDF is usually very thin, try to ensure this is as solid in colour as possible prior to applying your chosen topcoats. Thank you

BasZ In a durability test, the gloss would marginally win. The higher the sheen level the more resistant it is, however, under regular use, the end user would not notice such small margins. Thank you

Thank you for your enquiry, the high resin content in Eggshell can locate traces of surface contaminants such as grease, polish, wax, silicones etc. These can prevent the coating forming a smooth film, and in effect separate around the small areas or deposits on the surface, leaving spots, or indentations, the effect is called cissing. Wipe the surface with white spirits on a cloth, will degrease the surface, and the cloth will lift any contamination, once dry slightly sand and repaint