Leyland Trade Contract Matt Emulsion Paint Brilliant White 10Ltr (33680)

Hi This is a wall paint and due to its nature will not give a very durable surface, so it is not recommended for the uses you have. There are various paints more suitable such as the fast drying satin and gloss.

Hi There No - this will not stick very well on Fiberglass and the surface will not be durable. The fiberglass will need a primer and a more durable top coat.

Hi There Yes this can be used as a finishing coat on walls and ceilings but it will not provide a very durable or washable surface if you have to remove stains etc.

Applied by brush or roller, no. Applied by spray, diluted or straight from the tin, yes. Safety data sheet says 'non hazardous' but if you spray without mask (and eye protection) you are asking for paint in the throat/lungs/eyes. Unpleasant to say the least

Hi EmmB This product is a finish in its own right. If your plastered wall is fully dry, you can use which ever paint you intend to finish with, just dilute it according to the back of can instructions for absorbent surfaces (usually add 10% or 20% water ) If your walls are slightly damp, then contract matt is the only coating you can use until time that the surface is fully dry. Using the Contract matt as a mist coat/base coat prior to applying another coating, has and is still causing problems with delamination and blistering. It is fine once the coating has fully cured - around 30 days, but if you do not leave at least that amount of time, you are basically applying the next coats onto an unstable chalky finish. Thank you