Fitting Position
My angled TRV has been fitted on the right hand side of the radiators (outlet) and the lockshield on the left hand side (inlet) is the correct?
Asked by: Nash1
It is good practice to fit them on the flow but they are bi-directional so having them on the return should not make a big a differnece.
Answered by: Kudox Support
Date published: 2021-04-04
Can i change the angled valve for a straight valve?
Asked by: Thechamp
Unfortunately only the angled set is available at the moment.
Answered by: Kudox Support
Date published: 2020-07-17
Dimensions - How much to add to Radiator Width
Definitive answer only please. What pipe centres' width would a radiator (eg 800mm) be with these fitted.
Kudox (no reply), Screwfix community (many contradictions). If someone can just get out a measure and give me something I can trust.
Asked by: Russ1435
10mm heating system
My rads are all on 10mm pipe, I know these state 15mm but does the valves come with a 10mm reducer.
Thanks.
Asked by: Ash94
No, unfortunately the reducers would need to be purchased separately
Answered by: Kudox Support
Date published: 2020-09-13
Flow Return Position
Is it necessary to fit the valve horizontal if fitted on the return flow side of the radiator, or can it be vertical regardless of flow or return side.
Asked by: Lecwat
We recommend to install it on the flow for a more accurate temperature control; however it is bidirectional and can be either installed horizontally or vertically
Answered by: Kudox Support
Date published: 2019-07-14