JSP Force 8 Mask Respirator with Press-to-Check… (1863F)

£22.99INC VAT

Add to basket for...

JSP Force 8 Mask Respirator with Press-to-Check Filters P3 (1863F)

Twin cartridge half-mask with Typhoon valve provides superior low breathing resistance. Features a fully adjustable, 4-point cradle suspension harness with quick-release buckles, ensuring an effective fit. Durable thermoplastic rubber for a superior fit to most face shapes. Reflective strips create increased visibility in low light environments for added safety. Press-To-Check filters instantly verify that you have the correct seal every time.

  • Typhoon Valve for Low Breathing Resistance
  • 4-Point Suspension Harness
  • Press-To-Check Filters

More Info

View all: JSP Dust Mask Filters

£22.99INC VAT

Add to basket for...

JSP Force 8 Mask Respirator with Press-to-Check Filters P3 is rated 4.7 out of 5 by 101.
  • y_2018, m_8, d_19, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_101
  • loc_en_GB, sid_1863F, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 20ms
  • REVIEWS, PRODUCT

Add to saved list...

Save
Rated 5 out of 5 by from Great even with short beard I loved the price and performance. I like that the P3 filters are replaceable, and especially that I can test the effectiveness of the fit each time I put it on.
Date published: 2018-07-15
Rated 5 out of 5 by from Peace of mind This mask ticks all the boxes. comfortable fit, the great 'press to check' feature allows for a quick seal and fit test ensuring no leaks, easy to adjust and the mask shape around the nose allows for goggles to easily fit over the bridge. The availability of different filters is also a bonus. Great mask!
Date published: 2018-07-15
Rated 5 out of 5 by from Hayfever Sufferer I looked at 'pollen' masks but was not impressed so checked Screwfix. I know this is not designed for Pollen but it does the job perfectly and I can get replacement filters much more readily!
Date published: 2018-06-28
Rated 4 out of 5 by from Great protection against morta Bought this for protection while removing mortar with a diamond blade and angle grinder. Despite a tremendous amount of dust nothing got through! It’s very comfortable to wear but took a while to get correct fit on face. Strap adjusters were a bit fiddly to adjust . Works well with protective goggles and didn’t have any steaming up although was working outside. Much better than disposable masks and wish I’d bought one earlier.
Date published: 2018-06-03
  • y_2018, m_8, d_19, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_101
  • loc_en_GB, sid_1863F, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • REVIEWS, PRODUCT

Cleaning inside

When taking the mask off, excess dust often gets inside my mask. Is it OK to clean with warm soapy water with or without the filters in? Thanks
Asked by: Tony2017
Removing the filters from the Force 8 half mask is always recommended when cleaning and storing the product. Cleaning the half mask with warm water is always recommended, while opening the odour valve to clean out any unwanted particles also.
Answered by: PPE Expert
Date published: 2018-07-27

Is this mask suitable for working with bisque, glazing pottery and clay and using kiln?.

The advice given on a glazing video is to use a respirator which takes P100 cartridges which filters out to .3 micron particles. Does this mask comply? Thank you.
Asked by: Jaji
The mask and filters on the link shown above do not fully comply with NIOSH standard (where the P100 classification comes from) as the markings are to EN143 (European legislation) and not to the American NIOSH standard, however the mask and filters do perform at P100 level apart from the markings and user information. (LC)
Answered by: PPE Expert
Date published: 2018-07-24

Which would be best filter to use when treating for woodworm? Using Permethrin water based product

Asked by: LimitedEdition
There are a number of Material Safety Data Sheets available for Permethrin on line. Different manufacturers have different guidance from "respiratory protection not normally needed" all the way to "self contained breathing apparatus for mist spraying". The filter that you require will depend on the particular manufacturers MSDS and the method of application. (MNJ)
Answered by: Anonymous
Date published: 2018-08-04

how often do the filters on JSP force dust mask need changing.

Asked by: Strokesy
Changing the filters on average is 5 working days (42 hours) although this is usage and not expiry. Once adopting the Force 8 Half Mask ready fitted with P3 Press to Check filters the flow of air is very natural and free, when you are coming to the end of the usage (5 workings days, 42 hours) the flow of air becomes much more restricted and difficult to breath indicating a change in filters is required. On the front of the Force 8 Half Mask above the arrow we have designed a crease which will invert when the filters are struggling to work indicating the change in filtration is required, this is also used as an indication to alert the user.
Answered by: PPE Expert
Date published: 2018-07-28

Which filters should I use when spraying roundup weedkiller?

Asked by: Carrotcruncher
The P3 filters that come with this product are good for spraying weedkillers. The liquid droplets will be stopped by the filters. (MNJ)
Answered by: Anonymous
Date published: 2018-06-30
  • y_2018, m_8, d_19, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_38
  • loc_en_GB, sid_1863F, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 15ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Brand JSP
CE Standard (Tested to EN...) EN 140, EN 14387, EN 143.
Clothing Size Description One Size
Clothing Size Full Description One Size
Construction Material (Safety) Rubber
Filter Code P3
Gender Unisex
Manufacturer Guarantee 1 Year Guarantee
Model Name Force 8
Model Name/No Force 8
Pack Size 1
Parent Colour Grey
Pieces in Pack/Case 1
Product Type Mask Respirator with Press-to-Check Filters
Safety Code P3
Valve Type Typhoon Valve for Low Breathing Resistance

EN 140, EN 14387, EN 143.

Downloads

Instruction Manual