Hylec IP65 Weatherproof Outdoor Enclosure 250 x 150 x… (7766G)

£ 34.15INC VAT

Add to basket for...

Not available for delivery

Hylec IP65 Weatherproof Outdoor Enclosure 250 x 150 x 350mm (7766G)

Lockable blank door enclosure produced from ABS-HB (UV) plastic. Supplied complete with galvanised steel back plate and mounting brackets.

  • ABS Plastic Construction
  • Flame Retardant ABS UL94V-HB Casing
  • Temperature Range -20°C to +85°C
  • Lockable with Steel Back Plate
  • Suitable for Sea Salt Air Conditions
  • Suitable for Dry Dust Environments

More Info

View all: Hylec Industrial Enclosures

£34.15INC VAT

Add to basket for...

Not available for delivery

Add to saved list...

Save
Rated 5 out of 5 by from Waterproof Enclosure I’ve purchased many enclosures over the years and this unit is really good value for the money, One thing that let it down was the strength of the screws that secure the brackets to the enclosure, as one of the heads snapped off during tightening. Apart from that the enclosure is a really good buy.
Date published: 2021-08-07
Rated 4 out of 5 by from enclosure with tabs Good weatherproof box, does job. Took me a while to figure that extra bits went on outside to allow fixing without drilling box ( no instructions, but it's a box, so shouldn't need any). Also, the one I got, the screws for fitting metal back plate weren't long enough or box was missing captive nuts, not sure which. I just drilled through and used size 12 woodscrew to fix plate and box in one, so took off external fixing tabs... Came with 2 compression glass, which was a bonus.
Date published: 2021-04-22
Rated 4 out of 5 by from Don't read the specification According to the spec, the internal dimensions of the this box are bigger than the external. So it is in effect a Tardis!! But seriously do be careful about the dimension information. There is no way this box can fit anything in it of the dimension the spec gives as the internal mouldings impose into the box space. This is the second box I've bought that is not big enough because the spec has been quoted incorrectly
Date published: 2020-11-19
Rated 5 out of 5 by from Excellent piece of kit Well constructed box, did the job as well as expected, curious about extra fittings though
Date published: 2020-09-05
  • y_2022, m_5, d_14, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_GB, sid_7766G, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 94ms
  • REVIEWS, PRODUCT

How can you lock this box?

Asked by: WilburM
This can be locked through use of the keys provided. In the first image, there is a key inserted in the door already.
Answered by: Hylec
Date published: 2021-08-20

Can this be used as an outdoor electric meter box?

Asked by: M1989
An IP65 rated product can be used outside, provided any connections to or from the product are also suitably sealed to maintain the IP rating. IP65 should be considered as water resistant – typically against water jets from any angle, but would not be rated for submersion in water where an IP67/68 product should be considered.
Answered by: Hylec
Date published: 2021-07-16

Can this be pole mounted e.g. a telegraph pole?

I need to mount one on a telegraph pole to house mains power supply etc. for CCTV cameras but don't want to reduce the IP rating. Can't see the back in the photo. Are there mounting points that don't require holes to be drilled?
Asked by: JTtheman
The enclosure comes as standard with 4 x external mounting feet, used to secure the enclosure to a flat surface. The mounting points for these feet could be used to secure the enclosure to a telegraph pole without the need to drill additional holes which could compromise the IP rating.
Answered by: Hylec
Date published: 2020-12-14

Can the metal back plate be taken out to give more depth?

Asked by: SQ1970
Yes, supplied as an accessory only, fitment is at the discretion/requirement of the customer
Answered by: Hylec
Date published: 2021-03-11

Can this be used to case in a shed consumer unit

Can this be used to case in a shed consumer unit? I would just like a covering for the consumer unit so it is out of sight and cased in. Can it be used without the back plate?
Asked by: adnan786458
Yes it could be used for this purpose, assuming the dimensions are suitable – however the disconnect and reconnect of the consumer unit cables must be carried out by a suitably qualified person
Answered by: Hylec
Date published: 2020-11-07
  • y_2022, m_5, d_15, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_GB, sid_7766G, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 105ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Brand Hylec
Colour Grey RAL 7035
Construction Material (Electrical) ABS Plastic
Fixings Supplied Brackets & Fixings Supplied
Internal Depth 139 mm
Internal Height 350 mm
Internal Width 195 mm
IP Rating IP65
Locking System Type Locking Door
Manufacturer Guarantee 1 Year Guarantee
Overall Depth 150 mm
Overall Height 350 mm
Overall Width 250 mm
Pack Size 1
Parent Colour Grey
Pieces in Pack/Case 1
Product Type Enclosure

Product contents

Enclosure, steel back plate, 2 x keys, 2 x Kwik Fit cable glands and mounting wall brackets.