Hose 15mm x M10mm x 300mm 2 Pack (66361)

£ 4.09INC VAT

Add to basket for...

Hose 15mm x M10mm x 300mm 2 Pack (66361)

8mm bore. Suitable for drinking water. EPDM rubber inner tube. Stainless steel braided hose.

More Info

View all: Unbranded Compression Hoses

Bulk Save Save up to 5%
Bulk savings
QTY Price per item Saving
1 - 3 £4.09 -
4 + £3.88 Save 5%
£4.09INC VAT

Add to basket for...

Add to saved list...

Rated 4 out of 5 by from Okay I suppose It did the job but wasn't what I went in for. I bought a tap from Screwfix and the tail was snapped but they didn't sell the same tails.
Date published: 2021-07-30
Rated 4 out of 5 by from Not exact match but - I couldn't find exact replacement hoses to the originals which had a BSP fitting which screwed onto a compression fitting on the 15mm feed pipes. So selected these which had a 15mm compression fitting on the ends. However, I found that the tube nuts on the new hoses were similar to those on the BSP adaptor on the water supply pipes so I removed the BSP adaptor from the feed pipes, removed the olive and tube nut from the new hoses and then fitted the hose directly to the feed pipes, using the existing tube nut to tighten the compression fitting and this worked fine with no leaks.
Date published: 2021-03-21
Rated 5 out of 5 by from Flexible hoses Good pair of flexible hoses for connecting mono block tap to copper pipe. Added advantage as the tap can be installed first and fully tightened and then fit the hose with short 10 mm end first.
Date published: 2021-01-02
Rated 5 out of 5 by from Flexi tap hose Bought this as one of the hoses supplied with a tap was too long, and Screwfix stock a selection of lengths. Problem sorted.
Date published: 2020-12-15
  • y_2021, m_8, d_1, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_39
  • loc_en_GB, sid_66361, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 13ms

Is there a version of this with a female 15mm connection to go onto an isolating valve. Or is there a suitable adapter

Asked by: Anonymous
You can fit a 1/2" on to a normal isolation valve, and the rubber washer inside the 1/2 threaded side will create a seal, without having to tighten it too much.
Answered by: Dandaman90
Date published: 2021-07-20

What is the maximum (static) pressure for these hoses?

Asked by: iTryHard
Hello iTryHard, max pressure is 15Bar thank you for using Q and A.JB
Answered by: jboon
Date published: 2019-10-22

What is the wras approval number for this product?

Asked by: Anonymous
Hello, I've sent the WRAS approval number over to your email. If any one else requires this number please send an email over to online@screwfix.com or give us a call on 03330 112 112 so that we can always provide you with the most current information. Thanks for using Q&A, KC
Answered by: KirstieC
Date published: 2020-08-10

Is this WRAS Approved?

Does this product comply with BS6920?
Asked by: MitchellGas
Hello, This product is WRAS approved. Thank you for using Q&A.
Answered by: WillFarrell
Date published: 2019-11-03

Is the 15mm end a push fit connector? if not what connector needs to be on the pipe end please?

Asked by: maultby
Hello maultby, The 15mm end is a compression fitting. You don't need any additional fittings on the pipe end. In short, when you tighten the nut of the compression fitting an olive is squeezed tightly around the pipe forming the seal. Thanks for using Q&A
Answered by: KirstieC
Date published: 2018-11-09
  • y_2021, m_7, d_31, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_GB, sid_66361, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 26ms
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
A Size 15 mm
B Size M10 mm
Hose Bore Size 8 mm
Manufacturer Guarantee 1 Year Guarantee
Pack Size 2
Pieces in Pack/Case 2
Product Diameter 15 mm
Product Length 300 mm
Product Type Hose
Thread Size M10 "