Hilka Pro-Craft 2 Tonne Car Ramps 2 Pack (83061)

£ 49.99INC VAT

Add to basket for...

Hilka Pro-Craft 2 Tonne Car Ramps 2 Pack (83061)

Raises wheels up to 205mm off the ground. 215mm wide tracks. Enables safe working under the vehicle. 2-tonne capacity per pair.

More Info

View all: Hilka Pro-Craft Car Ramps

£49.99INC VAT

Add to basket for...

Add to saved list...

Save
Rated 5 out of 5 by from Ramped up the standard Good quality ramps. Not as chunky as ones I have owned in the past, but then some of my old ramps were rather over engineered. Strong enough to hold up my van so I could change the exhaust system so well happy. Definitely recommend these ramps.
Date published: 2020-12-29
Rated 5 out of 5 by from two tonne car ramps I bought this product on the strength of the brand Hilka is a company I have used for years and have never been let down by any of their products. this was backed up by the favourable reviews. on unpacking I was a little concerned as they were not nearly as strong looking as my previous ramps and considering that my car is no lightweight almost returned them, however I decided to give them a try and they were as good as gold, once again Hilka has proved to be a reliable product
Date published: 2020-02-05
Rated 1 out of 5 by from Rubbish I bought these to help my son work on his Renault Clio. Drove up and the top bars (rungs?) that the car sits on, bent! 2 tonne? I think not, it was a Clio for heavens sake! Not a sherman tank, landrover, mother-in-law (delete as appropriate) ;o)
Date published: 2019-01-29
Rated 5 out of 5 by from Car ramps! There are no working parts, so you can't go wrong. Unlike the Hilka car jack I bought which was leaking hydraulic oil before I even got to use it.
Date published: 2018-04-19
  • y_2021, m_8, d_1, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_GB, sid_83061, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 13ms
  • REVIEWS, PRODUCT

Can you use 4 to lift the entire car?

Asked by: Hanam
Hello, thank you for the question. I could only recommend using a pair at a time due to safety reasons. Regards, Hilka Tools
Answered by: Hilka Product Expert
Date published: 2021-07-09

Are the tyre sizes in the instructions correct?

The instructions say these ramps are suitable for tyres sizes 342x25cm-470x35.5cm yet the ramps are 21cm wide. Would these ramps be suitable for a car with 195/60/R15 tyres?
Asked by: MikeArcher
Hello, thank you for the question. I have checked the instructions with the product + all information on Screwfix and cannot find reference to the numbers mentioned above. The width of the track is 215mm. The width of the tyre should not exceed the width of the track. These would thus be suitable for a tyre with width 195mm. The max weight of the vehicle must not exceed 2 tonne. Regards, Hilka Tools.
Answered by: Hilka Product Expert
Date published: 2020-11-02

Re your 2 ton car ramps: do these stack/store easily (only have small space)

Asked by: dispeg
Hello, thank you for the question. The car ramps do stack on top of each other but not full interlock and are a large sturdy item. They can also be placed one on top of the other (one the correct way up and the other upside down) to form a rectangular shape which is the best way to store them. They however still take up a fair amount of space. These are not available to view in store before purchase but are available on a next day delivery into store. Regards, Hilka Tools
Answered by: Hilka Product Expert
Date published: 2019-08-09

Will the ramps be suitable for a mgtf with out damage to valance?

Mgtf year 2004
Asked by: Iowb
Hello, looking online the curb weight is1105kg and thus from a weight point of view should be fine. The wheels / tyres fitted as standard are 185/55R15 and thus this are also suitable. In terms of ground clearance required without damage to your vehicle this is very hard to state as depends so much upon height from ground, wheelbase length and bumper designer. My recommendation would be to ask to see a set in a Screwfix counter before purchase to see if suitable. Regards, Hilka Tools
Answered by: Hilka Product Expert
Date published: 2018-01-14

What is the platform width and is it suitable for tyres up to 255mm wide ?

Asked by: Raj2
Hello, this product has a 215mm wide track. Kind regards, Hilka Tools
Answered by: Hilka Product Expert
Date published: 2020-11-13
  • y_2021, m_8, d_2, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_GB, sid_83061, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 22ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Angle of Incline 20 °
Brand Hilka Pro-Craft
Manufacturer Guarantee 1 Year Guarantee
Max Height 205 mm
Max Load Capacity 2 Tonne
Pack Size 2
Pieces in Pack/Case 2
Product Depth 320 mm
Product Height 266 mm
Product Type Car Ramps
Product Width 838 mm
Total Product Weight 9.4 kg

Downloads

Instruction Manual