Flexible Tap Connector 15mm x ¾" x 300mm (9989G)

Hello Griff11, This would not be suitable as the self cutting tap is for connecting up a washing machine inlet hose. Thank you for using Q&A

Hello Shill2150, No, this won't work. 3/8th is approximately 9.6mm which is much less than 15mm. No top of that metric and imperial threads would have slightly different pitches so the threads won't line up. Thank you for using Q&A

Hello, Thank you for your enquiry. Bath taps usually have a 3/4" connection, (sink and basin connections are usually 1/2"). Hope that helps. Thank you for using Q&A.

Hello, No, these would not be suitable for this intended purpose. Thanks for using Q&A

Hello Smurfega, This item would not be suitable for this use, as the isolating valve is designed to seal through use of compression, whereas a threaded fitting as on the tap tails seals against a metal face at the base of one of the threads. This item is actually a 15mm compression fitting one end, to 3/4" BSP thread on the other (for connecting to taps). We would advise to fit a small section of pipe into the existing isolating valve compression fitting, to which the compression end of this tap tail can the also be attached. Thank you for using Q&A AS