Erbauer EMIS216S 216mm Electric Double-Bevel Sliding… (271FV)

£ 149.98INC VAT

Add to basket for...

Erbauer EMIS216S 216mm Electric Double-Bevel Sliding Mitre Saw 220-240V (271FV)

Side-mounted bevel control for quick and easy bevel adjustments left or right when in the front of the saw, as well as a laser guide for accurate cutting. Supplied with dust bag, TCT blade, clamp and wrench.

  • 1400W
  • Max. Cross Cut: 305 x 62mm
  • 40-Tooth TCT Blade
  • Trench Cutting Facility
  • Aluminium Base
  • Hard Start
  • Dust Bag
  • Quick-Release Clamp
  • Spindle Lock
  • Electronic Brake

More Info

View all: Erbauer Mitre Saws

£149.98INC VAT

Add to basket for...

Add to saved list...

Save
Rated 3 out of 5 by from chop saw bought this for my retirement moves when on the 0 mark and 45 degree mark after you have locked it in place. The dust extraction is bad I use a powerful hover has three motors on it and the dust still goes every where . The laser light and other light stopped after about 5 minuets of use so no would not recommend to many probs with it
Date published: 2022-06-23
Rated 4 out of 5 by from Decent saw for the money This is a great saw for the money. Usual features you’d expect. Cuts true and the laser is a bonus. Lucy was a great help in the Bude store helping my wife when collecting our order. Great service as always.
Date published: 2022-05-12
Rated 2 out of 5 by from blade spinning slowly bought this saw just over a year and a half to cut some fencing and a bit of decking worked great went to use it last week the blade is spinning slowly make sure you hold onto your receipt as it has a 2 year warranty i misplaced mine so couldn't claim on it
Date published: 2022-03-27
Rated 5 out of 5 by from Erbauer EMIS216S 216MM I've had this saw a few days but today was the first chance that I got to use it. I bought it to replace a much abused saw of the same size. I am very impressed with the Erbauer saw, its lighter than my old saw but still packs a punch. The carrying handles are well thought out and the addition of a light and a laser line are really useful. I have changed the blade for an 80 tooth blade and the cut is super smooth. The only things that I can mark it down for is the motor doesn't soft start and the instructions could be better. However all the positives outweigh these two negatives so I still give it a 5 out of 5 overall.
Date published: 2022-03-10
  • y_2022, m_7, d_1, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_154
  • loc_en_GB, sid_271FV, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 12ms
  • REVIEWS, PRODUCT

I have broken the quick release clamp. How can i replace it?

The verticle quick release clamp was broken after just 2 days of using the mitre saw. How can i replace this?
Asked by: Nayanajith
Hello Nayanajith, It appears that your product may be faulty, please take your product to a store of your choosing. To help you find a store here is our store locator https://www.screwfix.com/jsp/tradeCounter/tradeCounterPage.jsp. Thank you for using Q&A.
Answered by: jbeckman
Date published: 2021-11-19

Laser alignment

I’m having trouble in getting a straight cut when cutting down at vertical position 0degrees as the laser appears to be a couple of mm’s off centre of cutting path.can you advise?
Asked by: Steelo11
Hello Steelo11, The laser is not able to be adjusted. It appears that your product may be faulty, please take your product to a store of your choosing. To help you find a store here is our store locator: https://www.screwfix.com/jsp/tradeCounter/tradeCounterPage.jsp. Thank you for using Q&A
Answered by: SWake
Date published: 2020-11-19

How do I move the saw arm around on the swivel base that it’s in 90deg positions

Just opened up box to set saw up but cannot seem to swivel the base around so that saw is set in 90deg position
Asked by: Steelo11
Hello Anonymous, The saw blade will not rotate a full 90 degrees, only 45 left or right. Thank you for using Q&A
Answered by: Cwalm
Date published: 2020-11-02

What degree of accuracy can I expect with this saw?

Bought this last Friday and it didn’t cut straight on a cross cut and the bevel was out as well. Managed to adjust the fence for the cross cut to somewhere close and bevel can be adjusted with the grub screws at the back of the saw
Asked by: SS1486
Hello, Thank you for your enquiry. If you are unhappy with the accuracy of this I would recommend returning for an exchange. We have received very little feedback/returns regarding the accuracy so this does sound like a fault. Apologies for any inconvenience that this may cause. Thank you for using Q&A
Answered by: Screwfix778
Date published: 2022-06-22

Does this have a dust extraction facility and what size is it please?

Asked by: Matty0752
Hello Matty0752, Yes, this does have a dust extraction facility and either the supplied dust bag can be fitted or a suitable vacuum cleaner attachment an be fitted to the dust extraction outlet. The diameter of the dust extraction outlet is 35mm. Thank you for using Screwfix Q&A.
Answered by: JTremain
Date published: 2022-06-11
  • y_2022, m_7, d_1, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_51
  • loc_en_GB, sid_271FV, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 12ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Blade Description TCT Blade
Blade Diameter 216 mm
Brand Erbauer
Brushless Brushed
Cable Length 3 m
Carry Case/Bag Included Yes
Corded Tool Weight 19.1 kg
Disc Bore Size 30 mm
Manual or Powered Powered
Manufacturer Guarantee 3 Year Manufacturer's Guarantee (T&Cs Apply)
Max. Bevel Angles (L/R) 45° - 0° - 45°
Max. Cross Cut 305 x 62 mm
Max. Mitre Angles (L/R) 48° - 0° - 48°
Mitre Saw Bevel Slide Sliding
Mitre Stop Angles 0, 15, 22.5, 31.5 & 45 °
Model No EMIS216S
No. of Bevels Double-Bevel
No Load Speed 5000 rpm
Number of Teeth 40
Pack Size 1
Pieces in Pack/Case 1
Plug Included Includes Plug.
Power Output (Watts/Kw) 1400 W
Power Supply Electric
Power Voltage Supply 220-240 V
Product Type Mitre Saw

Product contents

EMIS216S, dust bag, TCT blade, clamp and wrench.

Downloads

Instruction Manual