Enlite EN-STK1200 LED Cuttable Striplight Warm White… (9486V)

£ 15.99INC VAT

Add to basket for...

Enlite EN-STK1200 LED Cuttable Striplight Warm White 1200mm 5.8W (9486V)

Single colour flexible LED strip with self-adhesive backing (must be applied to clean surfaces). Ideal for fast installation applications such as under cabinets, televisions and decorative shelving. With a beam angle of 120° and 16mm between LEDs, individual light points are less visible creating a continuous glow. Cut points every 50mm for maximum flexibility of length. Comes with 1.5m flex (to connect to the driver) and 0.3m tail attached (in case multiple strips need to be connected). 12V DC constant voltage LED driver required.

  • IP20
  • Compact Design
  • 1 Year Guarantee

More Info

View all: Enlite LED Tape Lights

£15.99INC VAT

Add to basket for...

Enlite EN-STK1200 LED Cuttable Striplight Warm White 1200mm 5.8W is rated 4.7 out of 5 by 6.
  • y_2020, m_7, d_8, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_GB, sid_9486V, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 19ms
  • REVIEWS, PRODUCT

Add to saved list...

Save
Rated 5 out of 5 by from LED STRIPLIGHT I have installed this product quite a few times now and very happy with it good quality and easy to install.
Date published: 2019-05-19
Rated 4 out of 5 by from Great LED Tape lights I installed two of these lights for a customer with the transformers. Very easy to install and a happy customer.
Date published: 2019-03-03
Rated 5 out of 5 by from What you need to know These tape borne LED lights are very bright and versatile especially if you are handy with a soldering iron. The tape is 8mm wide and at each side of the line where you are told you can cut them there is a pair of bare copper plated pads connected to the supply lines. The pads are about 2mm in diameter so you can cut the tape and, with a small tip soldering iron, reconnect the pads together using pieces of the supplied wire to go round any type of corner. So no fancy connectors needed to join round a corner and awkward angled corners aren’t a problem. If you don’t fancy soldering then the strips all have wires pre-connected at each end so you can cut a strip and you immediately have two already wired strips or you can use the wires to connect to another strip. As for the adhesive, well so far they have stayed on. I cleaned the surface with spirit (meths) and then peeled the protective strip off as I stuck them down. Trying them in place and then moving them using the self-stick would be asking for trouble. The resulting effect is brilliant. No clips or wires visible and the profile of the strip is only around 1mm so you don’t even need a pelmet if you don’t want one. Just setting the tape 25mm back from the edge of the cabinets should do it. The Aurora 12V driver works perfectly with these LED tape lights.
Date published: 2018-12-16
Rated 4 out of 5 by from Good light, good value Used under kitchen cupboards - great illumination spread evenly over the worktop. Easy to install but watch the soldered connections - some of them are barely attached but simple enough to fix with a soldering iron. 3 stars for reliability as they have only been installed for a week.
Date published: 2018-12-06
  • y_2020, m_7, d_8, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_GB, sid_9486V, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 106ms
  • REVIEWS, PRODUCT

Lumens per....?

Brightness is listed as 360 lm (lumen) is that per metre or per foot? All the different lengths of Enlite LED strip are listed as 360 lm, so difficult to work out.... Please advise thanks
Asked by: SteveW123
Hopefully Screwfix CS has answered your question. Many thanks Aurora
Answered by: Aurora Technical
Date published: 2020-05-01

Hi, can you connect these lights from either end to the transformer, ie could I cut them in half and connect both halves.Thank You

Asked by: RockStone
Hi, yes just make sure when connecting the positive and negative are connected correctly. Polarity is key. Thanks Aurora
Answered by: Aurora Technical
Date published: 2020-02-10

Does a connection to the household power come with this product i.e. 13a plug??

Asked by: sylvania
Hi, no you need to purchase the appropriate LED 12v driver and plug if required. Thanks Aurora
Answered by: Aurora Technical
Date published: 2019-09-07

I have an island which is 7m around so I would need to join 6 of these together so is that possible and is it seamless to do and won't require 7 plugs. How many is the maximum that can be joined? Would I be better getting two 5m reels and joining them?

Asked by: CraigF
Hi, Yes there can be joined by soldering. Max length advised would be 20m, and you will require a LED driver big enough to handle the load. Thanks Aurora
Answered by: Aurora Technical
Date published: 2018-11-03

Can I power these straight from a 12v battery?

Asked by: woofer66
Hi, Yes this requires 12v so will be fine. Thanks Aurora
Answered by: Aurora Technical
Date published: 2020-03-18
  • y_2020, m_7, d_8, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_GB, sid_9486V, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 98ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Brand Enlite
Colour Temperature Description Warm White
Colour Temperature Value 3200 K
Construction Material (Lighting) Aluminium & Plastic
Design Type Compact Design
Dimmable Dimmable
Fixings Supplied Fixings Not Required
IP Rating IP20
Lamps Supplied/Required LED integrated with strip
Lamp Type LED
Lm 360 lm
Lm Band 201-400
Manufacturer Guarantee 1 Year Guarantee
Max. Wattage 5.8 W
Model Name EN-STK1200
Pack Size 1
Pieces in Pack/Case 1
Power Consumption 5.8 W
Power Voltage Supply 12 V
Product Length 1200 mm
Product Type Cuttable Striplight
Product Width 8 mm