Cementone General Purpose Mortar Grey 5kg (36857)

The nearest pre-mixed Bostik cementone cement product there is for this type of application requirement is the Bostik Cementone Waterproof Rapid Setting Cement. This product is a cement based powder to which water is added and the product mixed to produce a workable mortar. It can be used for repair and maintenance requirements such as concrete floor and step repair and it can also be used for pointing and filling apertures around pipes among other applications. Minimum application width / depth is 4 mm.

The Bostik Cementone General Purpose Mortar is a cement based pre - mixed product to which water is applied and the product mixed to produce a workable mortar that can be used for requirements such as brick and block laying, pointing and masonry repairs. The product has not been tested for fixing ridge tiles a such, but it would not be expected that any issues would be encountered if it was suitably used and applied.

The Bostik Cementone General Purpose Mortar is a cement based pre - mixed product to which water is applied and the product mixed to produce a workable mortar that can be used for requirements such as brick and block laying, pointing and masonry repairs. However, looking at the requirement for securing timber sleepers to soil, the product is not recommended in this case, as in general, a suitable concrete mix will be required.

Cementone General Purpose Mortar sets hard after approximately 12 hours at 20°C. Full strength is achieved after 24 to 72 hours approximately at 20°C.