Aquapea APBL1 Polymer-Based Pipe Repair Tool (847PA)
For repairing small splits and holes in pipes up to 50mm diameter without requiring excavation. Can be used on leaks from 4-10Ltrs/min. Central polyropylene flotation and plug-in aid. Polymer-based adhesive.
- 4-10Ltr/min Flow Rate
- For use with 15-50mm Pipe Diameters
- Seals up to 50mm Holes
- Suitable for Copper, Plastic, Iron, Lead & Steel Pipes
- Suitable for Drinking Water
- Suitable for Hard & Soft Water Areas
View all: Aquapea Pipe Fittings
You may also like:
Specification | |
---|---|
Brand | Aquapea |
Label Info 1: Signal Word | Warning |
Label Info 2: Hazard Statements | H315 Causes skin irritation.H317 May cause an allergic skin reaction.H319 Causes serious eye irritation.H412 Harmful to aquatic life with long lasting effects. |
Label Info 3: Precautionary Statements | P261 Avoid breathing dust/fume/gas/mist/vapours/ spray.P272 Contaminated work clothing should not be allowed out of the workplace.P280 Wear protective gloves/protective clothing/eye protection/face protection.P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.P362 + P364 Take off contaminated clothing and wash it before reuse.P501 Dispose of contents/container to … |
Label Info 5: Hazardous Chemical Content | reaction product: bisphenol-A-(epichlorhydrin);epoxy resin (number average molecular weight ≤ 700) |
Manufacturer Guarantee | 1 Year Guarantee |
Max. Pressure @ Max. Temperature | 20 |
Max. Pressure @ Min. Temperature | 20 |
Max. Water Flow Rate | 10 Ltr/min |
Maximum Operating Temperature | 100 °C |
Min. Pipe Size | 15 mm |
Min. Water Flow Rate | 4 Ltr/min |
Minimum Operating Temperature | 0 °C |
Model Name | APBL1 |
Pack Size | 1 |
Pieces in Pack/Case | 1 |
Product Type | Polymer-Based Pipe Repair Tool |
Suitable Water Hardness | Suitable for Hard & Soft Water Areas |
Working Diameter | 50 mm |