Sync Energy Wall Charger 2 4G RFID 1 Port 22kW 3-Phase Mode 3 Type 2 Socket Smart EV Charger Grey (343RW)
22kW 3-phase smart EV charger with Type A RCD (30mA AC + 6mA DC). Small and easy to install, with colour-customisable front fascias (sold separately). Ideal for electric and hybrid vehicles. WiFi, Ethernet, 4G, RFID and OCPP 1.6 capabilities. No earth rod required, integrated open PEN conductor protection. CT clamps available separately. For use with the Monta app.
- Works with - iOS App - Android App
- 400V AC 3-Phase Charging
- Type 2 Socket (Cable Not Supplied)
- Integrated DC Fault Protection, Short Circuit & Low / High Voltage Protection
- Waterproof & UV-Resistant
- IP55
- Must be Fitted by a Qualified and Registered Installer
- IK10 Impact Resistance
- Auto-Lock for Security
- Hub Not Required
View all: Sync Energy Electric Vehicle Charging
22kW 3-phase smart EV charger with Type A RCD (30mA AC + 6mA DC). Small and easy to install, with colour-customisable front fascias (sold separately). Ideal for electric and hybrid vehicles. WiFi, Ethernet, 4G, RFID and OCPP 1.6 capabilities. No earth rod required, integrated open PEN conductor protection. CT clamps available separately. For use with the Monta app.
- Works with - iOS App - Android App
- 400V AC 3-Phase Charging
- Type 2 Socket (Cable Not Supplied)
- Integrated DC Fault Protection, Short Circuit & Low / High Voltage Protection
- Waterproof & UV-Resistant
- IP55
- Must be Fitted by a Qualified and Registered Installer
- IK10 Impact Resistance
- Auto-Lock for Security
- Hub Not Required
View all: Sync Energy Electric Vehicle Charging
You may also like:
| Specification | |
|---|---|
| AC/DC Voltage & Charging | 400V AC 3-Phase Charging |
| Brand | Sync Energy |
| Cable Entry Points | Bottom & Rear |
| Charging Mode | Mode 3 |
| Colour | Grey |
| Communication Protocol | OCPP |
| Compatible with Solar Panels | Not Compatible with Solar Panels |
| Construction Material (Electrical) | Polycarbonate |
| Current Rating | 6-32 A |
| Display Type | Without Display |
| Domestic/Commercial Use | Suitable for Domestic & Commercial Use |
| EV Plug Type | Type 2 |
| EV Product Type | Stations |
| Fitting Requirements | Must be Fitted by a Qualified and Registered Installer |
| Frequency Band (Smart) | 2.4 GHz |
| Hertz (Hz) | 2.4 Hz |
| IK Rating | IK10 |
| IP Rating | IP55 |
| Initial Connection Network | WiFi |
| Internet Connection Required | Cloud Control (Internet Connection Required) |
| Manufacturer Guarantee | 3 Year Manufacturer's Guarantee (T&Cs Apply) |
| Model Name | Wall Charger 2 4G RFID |
| Model No | EVWC2S22GGR-01 |
| Mount Type | Wall Mounted |
| Network Standards (Full) | WiFi |
| No. of Bands | Single-Band |
| No. of Phases | 3-Phase |
| No. of Ports | 1 Port |
| Pack Size | 1 |
| Pieces in Pack/Case | 1 |
| Plug Type | Type 2 Socket |
| Power Rating (Watts Kw) | 22 kW |
| Power Type | Mains-Powered |
| Product Depth | 117 mm |
| Product Height | 305 mm |
| Product Type | Smart EV Charger |
| Product Width | 201 mm |
| RFID Card Included | RFID Card Supplied |
| Resistant Type | Waterproof & UV-Resistant |
| Smart Compatibility | App Controlled |
| Smart Hub Requirement | Hub Not Required |
| Standby Power Consumption | 4 W |
| Switched/Unswitched | Unswitched |
| Temperature Range | -25 to +40 °C |
| Total Product Weight | 2.397 kg |
| Wireless Range Restrictions | Electronic interference from appliances or physical obstruction, such as brick walls, metal frames and floors, can reduce the wireless range. A signal weakens every time it encounters an obstruction. |
| Works with Amazon Alexa | Does Not Work with Amazon Alexa |
| Works with Android App | Works with Android App |
| Works with Apple HomeKit | Does Not Work with Apple HomeKit |
| Works with Google Home | Does Not Work with Google Home |
| Works with Home Assistant | Does Not Work with Home Assistant |
| Works with Homey | Does Not Work with Homey |
| Works with Hubitat | Does Not Work with Hubitat |
| Works with Matter | Does Not Work with Matter |
| Works with Myko | Does Not Work with Myko |
| Works with Samsung SmartThings | Does Not Work with Samsung SmartThings |
| Works with iOS App | Works with iOS App |
| z1 - UK Manufacturer Name | Luceco UK Ltd |
| z2 - UK Manufacturer Postal Address | Luceco Distribution Centre, Stafford Park 1, Shropshire, TF3 3BD |
| z3 - UK Manufacturer Electronic Address | technical.support@luceco.com |
| z4 - EU Manufacturer Name | Luceco SE |
| z5 - EU Manufacturer Postal Address | Luceco SE Distribution Centre, C/ Bobinadora 1-5, Mataró, Barcelona, 8302, Spain |
| z6 - EU Manufacturer Electronic Address | es_ordersretail@luceco.es |
Product Contents
RFID card, 25mm compression gland, 25mm blind grommet and installation washers.