I didn't quite understand your earlier answer regarding a similar question as it seems to say that the M10 end connects with the feed pipe and the 1/2"BSP with the tap.
Thank you
Mine came with M12 not M10, but that goes into the tap and the female 1/2" BSP needs an adaptor to fit onto the pipework.
Screwfix don't seem to do a male 1/2" to 10mm pipe, just 1/2" to 15mm, so you may need to go to 15mm first and then use a reducing coupler.
A 15mm compression fitting does use a 1/2" BSP thread, so you could just go straight to the reducing coupler (and I'm sure lots of people do), but the compression fittings are tapered on the inside to seal on the olive and don't seal as well to the flat seal in the flexi tails.
Answered by: Matt90
Date published: 2020-08-23