Kitchen Splashback 1m x 1m
Will these screws, placed one in each corner, be able to hold a 1m x 1m glass splashback that is 6mm thick? Weight approx 12-13kg.
Asked by: GG50
how do you scew it in.
I cant see how you screw it in there's nowhere for a screwdriver to fit.
Asked by: eastgrinsteadfixerman
You completely misunderstood my previous question
I need the diameter of the SHAFT which protects the glass from the screw. I need to specify the hole size in the glass before it gets toughened, so can't alter it afterwards.The size of the cap is irrelevant to the hole size in the glass.
Asked by: TC60
The answer from screwfix is wrong..
The black insert measures 6.4mm, which passes through the glass. 7.8mm in length.
Answered by: besky
Date published: 2020-05-14
What is the outside diameter of the plastic bush ?
i.e. what diameter hole needs to be drilled through the glass to accommodate the bush
Asked by: TC60
Hello TC60,
The cap on top is 12mm but it is meant to sit proud of the mirror. If you drill a hole large enough to accomodate the caps, the screws won't be able to hold it in the wall.
Thank you for using Q&A (CW)
Answered by: Cwalm
Date published: 2020-03-06
Hi, are these suitable for a 900mm x 750mm glass slashback wieight approx 11kg
Asked by: Jackmax
Hello there,
This item should be possible to fit onto this glass splashback.
Thank you for using Screwfix Q&A.
Answered by: HTrowbridge1
Date published: 2020-01-25
