Toolpak Drawstring Lambs Wool Bonnet 180mm (81043)

If the machine can run at a very low rpm and has an m14 fitting then yes it can. Using this product at a high speed will cause heat that will burn the surface being polished.

These are for use on painted surfaces but you can use them in a polishing machine (not a grinder) at a slow speed on beeswax. Please note it is very important that you don't allow the work surface to get hot that the beeswax has been applied to while polishing as this will damage the area being polished.

A 180mm buffing head will require a 180mm backing pad to fit correctly. You will also need to be using it on a sander/polisher machine that runs at a much slower speed than an angle grinder.