Rated 2 out of
5
by
FluidPlumbing from
Poor flow and hard to fit
I read some of the reviews about this rad giving off poor heat and was quite sceptical. Turns out they were right.
I bought this rad to replace a standard panel radiator in my sons room. I deliberately over sized it in terms of BTUs and I’m glad I did.
First off, it’s very tricky to hang. You have 4 wall brackets with very minimal room for adjustment. What’s worse if you fit the brackets with one screw when you test hang it, the brackets move under the weight. They literally flip sideways. So you have to fit two screws and completely fix each bracket. So you better make sure you’re millimetre perfect with each bracket.
Then after fitting it I found that the rad gives off very poor amounts of heat. The flow and return pipes are burning hot. I’ve balanced the system. Turned off all the other reds. I tried everything. But it seems the flow through the rad is quite poor. The flow seems to go straight in and out. And oddly the bottom of the rad remains cold. Only the top heats up.
Date published: 2020-10-23
Rated 1 out of
5
by
DIYTRYANYTHINGONCE from
Don't Bother
We bought this for our builders to fit in our new extension. The first one we received was damaged so Srewfix arranged an exchange. The builders had to work around this delay.
The second was fine and was fitted straight away. When the heating was commissioned it was noted that the radiator wasn't heating up all over and wasn't getting very hot but it was summer at the time so not really an issue. When winter came it still wasn't heating up and the builder advised we should arrange an exchange. I rang screwfix and was told to have the heating system flushed and the system rebalanced. This I have now had done at quite a considerable cost.
Despite this work the radiator still only gets warm at 22 degrees when the others in the house were reading 28. The thermal images my plumber took shows that the heat is only getting to 1 of the 10 bars of the radiator.
It also seems to have brown rusty marks starting to form at the bottom.
Very poor product and very unhappy customer.
Date published: 2019-09-16
Rated 5 out of
5
by
schutz from
Beautiful looking
Lovely stylish radiator which sets of the room nicely
Date published: 2019-02-17
Rated 5 out of
5
by
ManMachine from
Excellent
Looks good, great heat output and good value, very happy and just bought my 2nd :)
Date published: 2019-01-30
I currently have a Ximax Atlas 1800-410 radiator installed. Does this new radiator fit directly into the same pipework below?
Asked by: yntny
Cold at base
Does this radiator have a direction of flow? I replaced an existing 'standard' rad but it fails to heat either fast or fully. Every other rad is hot. Tried closing down all other rads and it does seem to get hot? Exit pipe is only luke warm.
Asked by: BeerTech
hi there, this radiator is universal so can be hung either way, if the pipes don't get fully hot then you will have to trickle fill the radiator, if this doesn't work then turn 180* and if this doesn't work then please contact our customer service team and we can advise further what we can do. this will not be a radiator fault, just needs an extra push of water flow - thanks Ximax
Answered by: Ximax Support
Date published: 2021-01-12
Do i need a TRV valve for this product?
Asked by: Mike0000019
yes
Answered by: Ximax Support
Date published: 2021-01-05
Replacement
Can this radiator be used to replace a single of the same make and model? I intend to swap my single for the duplex but will I need new brackets or can I just make use of the old?
Asked by: And4465
hi there, you will have to get in contact with screwfix directly to swap radiators - thanks Ximax
Answered by: Ximax Support
Date published: 2021-01-05
Rad not getting hot / patchy heat?
I fitted this rad at home some time ago and it’s never worked particularly well. It’s fed using a bi- directional central valve. When using the central connections is there a particular side the flow has to come from?
Asked by: Tommy678
hi there, please try draining the radiator and trickle filling it, this will clear any trapped air in the radiator, if this does not work then please contact our customer service team and they will be able to help with the next steps, thanks Ximax
Answered by: Ximax Support
Date published: 2021-01-05
| Specification |
| Brand |
Ximax |
| BTU |
4419 BTU |
| BTU Band |
4001-6000 |
| CE Standard (Tested to EN...) |
EN 442. |
| Connection Size |
1/2 " |
| Construction Material (Plumbing) |
Steel |
| Delta T |
Delta T50°C |
| Manufacturer Guarantee |
10 Year Manufacturer's Guarantee (T&Cs Apply) |
| Max. Working Pressure |
9 bar |
| Max. Working Temperature |
120 °C |
| Model Name |
Aurora |
| Model Name/No |
Aurora |
| Model No |
SAURD1800300W |
| No. of Radiator Profiles |
Double |
| No. Of Sections |
11 |
| Orientation |
Vertical |
| Pack Size |
1 |
| Parent Colour |
White |
| Pieces in Pack/Case |
1 |
| Power Output (Watts/Kw) |
1295 W |
| Product Height |
1800 mm |
| Product Type |
Duplex Designer Radiator |
| Product Width |
300 mm |
| Projection from Wall (Std Bracket) |
105 mm |
| Radiator Accessories Included |
Wall Fixings, Plug & Vent Included |
| Radiator Brackets Supplied |
Brackets Supplied |
| Radiator Coating & Finish |
Powder-Coated |
| Radiator Colour |
White |
| Radiator Height Band |
1800mm or Greater |
| Radiator Water Content |
11 Ltr |
| Radiator Width Band |
Less than 301mm |
| Suitable System |
Suitable for Hot Water Central Heating Systems |
| Test Pressure |
12 bar |
| Total Product Weight |
33.1 kg |
| Wall to Centre (Standard Bracket) |
60 mm |
Downloads
Instruction Manual
*Delivered direct from our suppliers in the number of working days stated on the delivery button
