Moretti Modena Designer Radiator 1800 x 578mm White… (3529D)

£ 390.29INC VAT

Add to basket for...

Delivered by our approved supplier, find out more

Delivered by our approved supplier, find out more

Moretti Modena Designer Radiator 1800 x 578mm White 6179BTU (3529D)

Unfortunately this product cannot be delivered offshore.

Stylish and versatile, the Modena range of radiators have a sturdy steel construction and a high heat output, yet are easy to handle and install.

  • 5 Year Manufacturer's Guarantee (T&Cs Apply)
  • 6179BTU 1811W
  • Brackets, Plug & Vent Included
  • Vertically-Mounted
  • Contemporary Design
  • Epoxy Polyester Powder-Coated Steel Construction
  • Number of Pipes/Sections: 8
  • Suitable for Central Heating Systems
  • Manufactured in the UK

More Info

View all: Moretti Designer Radiators

£390.29INC VAT

Add to basket for...

Delivered by our approved supplier, find out more

Add to saved list...

Save
Rated 5 out of 5 by from Good radiator, easy to fit Second of these bought recently to gain more wall space in different rooms. Good heat output and easy to fit, with level brackets (some cheaper radiators have brackets not quite level, making it near impossible to install properly vertical)
Date published: 2022-03-22
Rated 3 out of 5 by from Warning - Solid single panel radiator and easy to mount and adjust but be warned - the unit came from the factory assembled upside down! The pre-installed valves and caps, along with the red sticker indicating which side had the internal baffle were reversed out of the box - meaning half the radiator was cold once installed After stripping it off the wall again, we manually checked the baffle location (by poking a length of wire inside) only to locate it half way between the valve plugs on the opposite side than indicated by the sticker and pre-fitted valves/caps. Turned the Radiator through 180°, reinstalled all the fittings on the correct side, removed the misleading sticker and remounted everything - all works great now. Just watch out for this issue if you buy one and have uneven heating.
Date published: 2021-12-01
Rated 5 out of 5 by from Eye catching feature in the ro Lovely feature in the living room and because of the vertical construction, it doesn't just warm the back of the settee up! Would definitely recommend.
Date published: 2021-05-13
Rated 5 out of 5 by from Great looking radiator! Bought this to replace an old run of the mill radiator, looks great on the wall and does the job perfectly. Make sure you eat your Weetabix before attempting to hang it on the wall, or get someone to give you a hand!
Date published: 2021-05-13
  • y_2022, m_8, d_12, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_60
  • loc_en_GB, sid_3529D, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 17ms
  • REVIEWS, PRODUCT

Are there baffles between the front and back panelss

Asked by: GeorgegDIY
Hello, Thank you for your enquiry. Please see the following reply from the supplier: Yes there is a baffle in one of the headers. There should be a sticker on the header which contains the baffle. If the sticker is not present, there are two ways to check which header has the baffle prior to install 1) the header will have etching ( with some numbers) visible under the paint work. 2) Run a thin wire in the connections from on end of the header to the next. The header with the baffle will stop the wire. Hope that helps. Thank you for using Q&A.
Answered by: Screwfix778
Date published: 2022-07-01

What are the pipe centres please?

Asked by: Kev657
Dear Customer, Thank you for showing interest in our products. The pipe centres of the above product is 538mm. Thank you
Answered by: BARLO-MORETTI-DESIGN
Date published: 2022-06-15

Do you get top cover grilles for the Moretti Modena radiators

Asked by: Kath3
Dear Customer, Thank you for showing interest in our products. The answer is no, this product does not have any top cover between tubulars and it does not need one either. Best regards
Answered by: BARLO-MORETTI-DESIGN
Date published: 2022-06-18

What is the filled weight of this radiator?

Asked by: HALSEY
Dear Customer, Thank you for showing interest in our product. The weight of this product is 40.79 kg without any water in it. the capacity of this product is 15.12 litre of water. Although each litre of water weights 1kg, but this might change slightly depends on the water treatment customers use for their heating system. So the filled weight will be approximately 56kg with some margin of error. Best regards
Answered by: BARLO-MORETTI-DESIGN
Date published: 2022-05-31

Re product code 3157D what is the recommended inlet and outlet pipe diameter pleaseter

Asked by: Chris123Mac
Dear Customer, Thank you for showing interest in our products. The dimension for inlet and outlet pipes are the same and the standard connections are 4 X 1/2" with 1/2" blank plug and vent. Best regards
Answered by: BARLO-MORETTI-DESIGN
Date published: 2022-03-26
  • y_2022, m_8, d_12, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_165
  • loc_en_GB, sid_3529D, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 9ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Brand Moretti
BTU 6179 BTU
BTU Band 6001-8000
CE Standard (Tested to EN...) EN 442.
Construction Material (Plumbing) Steel
Delta T Delta T50°C
Manufacturer Guarantee 5 Year Manufacturer's Guarantee (T&Cs Apply)
Model Name Modena
No. of Radiator Profiles Double
No. Of Sections 8
Orientation Vertical
Pack Size 1
Parent Colour White
Pieces in Pack/Case 1
Power Output (Watts/Kw) 1811 W
Product Height 1800 mm
Product Type Designer Radiator
Product Width 578 mm
Projection from Wall (Std Bracket) 99 mm
Radiator Accessories Included Brackets, Plug & Vent Included
Radiator Coating & Finish Epoxy Polyester Powder-Coated
Radiator Colour White
Radiator Height Band 1800mm or Greater
Radiator Width Band 501-700mm
Suitable System Suitable for Central Heating Systems
Test Pressure 5.2 bar
Total Product Weight 48.23 kg
Wall to Centre (Standard Bracket) 60 mm

Product contents

Radiator, plug and vent, wall brackets and anti-vibration clips.

Downloads

Instruction Manual

Delivered direct from our suppliers in the number of working days stated on the delivery button

Direct from our supplier delivery restrictions

Geographic restrictions apply, check your postcode below to see if any apply to you. For some locations delivery may take longer than the specified delivery time, and we can not currently offer delivery to offshore addresses.

Please ensure we have your mobile phone number when you order so we can keep you updated with deliveries.

Returns

Please note - If you wish to return this item you will need to call us on our freephone number 03330 112 112 to arrange a free collection.

DELIVERED FROM OUR APPROVED SUPPLIERS - FAQS

Were we able to answer your question? If not, please Contact Us.