Rated 2 out of
5
by
PeelySpud from
12 * 10 yardmaster
Seriously this takes a long time to put up. It took 2 of us (both seasoned diyers) over a week to complete. Due to wooly diagrams and few instructions. Lots metal panels (3 section gable ends in particular) needed to bent into shape so that they could be screwed together. Screws being stainless steel were not magnetic so forever picking them up (even when we used bluetack to hold screw to the driver bit) It would have been easier if they had given instruction as to where to put screws when putting the frame together to do not having to remove them later to secure a roof or ridge panel with pre drilled hole ie every 4th hole as there are multiple pre drilled holes on each section of the frame work. Looks good when finished but totally insecure. I don't put anything of great value in it as the doors are extremely flimsy a good shove would have them off their rails with plastic runners and handles to secure a padlock to. You could get in by un screwing a panel anyway so don't bother locking it. Had to line inner walls with ply so not to dent the outer panels with items resting against the wall's.
In hindsight I don't think I would buy it again.
Instead spending double the amount and build a timber framed pvc clad shed instead. Tip if your putting on a timber base I mounted this shed on 8 50mm x100mm 2.9m joists resting on level hard ground using 4 18mm x 1220mm x 2440mm OSB Boards with a base measurement of 2900mm by 3660mm I squared the frame up securing to floor leaving approx 20mm all round then used flashing tape to overlap frame and exposed base to stop rot a water getting into shed once up.
Date published: 2020-12-27
Rated 3 out of
5
by
paintbrush2 from
Not suitable for dry storage
The instructions are purely exploded views unfortunately with no wording which would have saved time when trying to assemble for example the apex cover is in 3 parts should only be overlapped by one hole if it said this in writing it would be a lot easier than trial and error. Needed longer screws and would be better with a fixing on the inside for quicker more secure assembly. It looks smart but condensation is dripping inside all the time and is a really big problem because I was hoping to store furniture in this I will be contacting the manufacturer to see what can be done. If you are looking for a dry secure storage option this isn't it.
Date published: 2019-12-30
Rated 5 out of
5
by
IDG13 from
Great shed
This is a great shed for the price. It's solid once constructed (but it is a bit flimsy while being constructed).
All the previous reviews are correct, the assembly, while not particularly complex, does take quite some time. I built it on my own and it took around 10 hours. Unless the your intended location for the shed is very sheltered, you need to build it in one go and on a calm day, as until it is fully assembled it is a bit flimsy and a strong breeze would cause damage.
Mine has been up for a few months now and I have no complaints.
The only negatives with the shed are:
1. It doesn't have an integrated floor and needs to be bolted down.
2. As it has a thin metal roof, there can be a lot of condensation on cold mornings and evenings. Building it on a raised wooden floor would help, but I have cut a couple of holes in each gable end of the roof and added a couple of air brick vents over them (screwfix item 54272) which seems to have resolved the worst of it.
Date published: 2019-12-05
Rated 5 out of
5
by
SR64 from
Excellent quality good value f
This is a super shed for the price. It definitely needs two people. In my case two women myself and my daughter. Really would recommend this product. The perspex roof makes all the difference too.
Date published: 2019-06-27
Is this a Yardmaster 108 TBSL model?
Asked by: badgereye
Do you have a contractor who could install this shed?
Asked by: Anonymous
Is there an option to buy a floor?
Asked by: Anonymous
What is the width of the door
Asked by: Whippy62
Can you confirm the colours
Asked by: Riley2020
| Specification |
| Base Included |
Base Not Included |
| Brand |
Yardmaster |
| Fixings Supplied |
Fixings Supplied |
| Footprint Depth |
1860 mm |
| Footprint Width |
2850 mm |
| Internal Depth |
1800 mm |
| Internal Height |
2230 mm |
| Internal Width |
2800 mm |
| Manufacturer Guarantee |
12 Year Manufacturer's Guarantee (T&Cs Apply) |
| Nominal Depth |
6 ' |
| Nominal Dimensions |
10' x 6' |
| Nominal Width |
10 ' |
| Outdoor Building Door Type |
2 x Doors |
| Outdoor Building Roof Shape |
Apex |
| Overall Depth |
1970 mm |
| Overall Height |
2240 mm |
| Overall Width |
3030 mm |
| Pack Size |
1 |
| Pieces in Pack/Case |
1 |
| Product Type |
Shiplap Sliding Door Shed |
| Resistant Type |
Fire-Resistant |
| Roof Panel Type |
2 Transparent Roof Panels |
| Self-Assembly |
Self-Assembly |
| Total Product Weight |
105 kg |
| Ventilation Type |
Ventilated |
Product contents
Anchor kit contains 4 x bolts, 4 x washers, 4 x plastic rawl plugs and 4 x hold-down gussets.
Downloads
Instruction Manual
*Delivered direct from our suppliers in the number of working days stated on the delivery button
