Masterplug 1 Port 7.4kW Mode 3 Type 2 Socket Tethered Smart EV Charger with 5m Cable Black (150RL)
Mode 3 charger with 5m Type 2 cable. Can be connected to Monta App on a smart phone. Ideal for electric vehicle charging at home, workplace, or for fleet service operators.
- Works with - iOS App - Android App
- 230V AC Charging
- 5m Type 2 Tethered Cable
- Integrated DC Fault Protection, Short Circuit & Low / High Voltage Protection
- UV-Stabilised & Weather-Resistant
- IP55
- Must be Fitted by a Qualified Electrician
- IK08 Impact Resistance
- Easy to Install Design
- Internet Connection Required
View all: Masterplug Electric Vehicle Charging
You may also like:
| Specification | |
|---|---|
| AC/DC Voltage & Charging | 230V AC Charging |
| Brand | Masterplug |
| Cable Entry Points | Bottom & Rear |
| Charging Mode | Mode 3 |
| Colour | Black |
| Communication Protocol | OCPP |
| Compatible with Solar Panels | Compatible with Solar Panels |
| Construction Material (Electrical) | Polycarbonate |
| Current Rating | 32 A |
| Display Type | LED Indicators |
| Domestic/Commercial Use | Suitable for Domestic & Commercial Use |
| EV Plug Type | Type 2 |
| EV Product Type | Stations |
| Fitting Requirements | Must be Fitted by a Qualified Electrician |
| Frequency Band (Smart) | 2.4 GHz |
| Frequency Range | 2.4 GHz |
| Hertz (Hz) | 2.4 G Hz |
| IK Rating | IK08 |
| IP Rating | IP55 |
| Initial Connection Network | WiFi |
| Internet Connection Required | Cloud Control (Internet Connection Required) |
| Manufacturer Guarantee | 3 Year Manufacturer's Guarantee (T&Cs Apply) |
| Model No | EVCM3ST7B |
| Mount Type | Wall-Mounted |
| Network Standards | 2.4GHZ 802.11 B/G/N - WPA/WPA2/WPA2-ENTERPRISE, Bluetooth - 4.2BR/EDR and BLE |
| Network Standards (Full) | Bluetooth & WiFi |
| No. of Bands | Single-Band |
| No. of Phases | Single-Phase |
| No. of Ports | 1 Port |
| Pack Size | 1 |
| Pieces in Pack/Case | 1 |
| Plug Type | Type 2 Socket |
| Power Rating (Watts Kw) | 7.4 kW |
| Power Type | Mains-Powered |
| Product Depth | 130 mm |
| Product Height | 304 mm |
| Product Type | Tethered Smart EV Charger with 5m Cable |
| Product Width | 236 mm |
| RFID Card Included | RFID Card Not Supplied |
| Resistant Type | UV-Stabilised & Weather-Resistant |
| Smart Hub Requirement | Internet Connection Required |
| Standby Power Consumption | 4 W |
| Switched/Unswitched | Unswitched |
| Temperature Range | -25 to 50 °C |
| Total Product Weight | 3.71 kg |
| Wireless Range (Max.) | 50m |
| Wireless Range Restrictions | Electronic interference from appliances or physical obstruction, such as brick walls, metal frames and floors, can reduce the wireless range. A signal weakens every time it encounters an obstruction. |
| Works with Amazon Alexa | Does Not Work with Amazon Alexa |
| Works with Android App | Works with Android App |
| Works with Apple HomeKit | Does Not Work with Apple HomeKit |
| Works with Google Home | Does Not Work with Google Home |
| Works with Home Assistant | Does Not Work with Home Assistant |
| Works with Homey | Does Not Work with Homey |
| Works with Hubitat | Does Not Work with Hubitat |
| Works with Matter | Does Not Work with Matter |
| Works with Myko | Does Not Work with Myko |
| Works with Samsung SmartThings | Does Not Work with Samsung SmartThings |
| Works with iOS App | Works with iOS App |
Product Contents
Charger, CT clamp, 5m Type 2 tethered cable, 25mm compression gland, 25mm blind grommet, EPDM fixing washers (5), anti-tamper bit and power connectors.