Di-Log DL9130EV 18th Edition Multifunction Tester with Adaptor (473JP)
Kit comprising DL9130EV multifunction tester and DLEV1 EVSE charge station adaptor. Designed specifically for service engineers that offer EV installation as part of their electrical installation portfolio. Tester comprises several features critical to the safe verification of EVSE charge station installation, including 6mA pure DC test for RDC-DD verification and a full EV testing sequence for verifying the DC protection provided by the EV charger, along with Type A RCD protection. Also features Type B RCD test, Zmax to record the maximum Z's test recorded during a recording session and Rmax, which automatically captures the maximum R1+R2 continuity test reading and registers the result on the secondary display for recording once testing is complete. RGB colour-changing screen indicates potential pass/fail conditions, whilst a secondary display captures recorded results of fully automated continuity and earth loop auto start. Continuity test includes auto start and null facility to zero out lead resistance. Loop impedance/PSCC auto-start RCD-LOC XLT loop test principle will not trip any RCD or RCBO. 2/3 wire high current loop with intelligent detection identifies whether measurement is 2-wire or 3-wire loop/PSCC without the need for selection. Variable RDC test feature to dial in bespoke mA values. DLEV1 universal EVSE charge station adaptor kit will simulate the Proximity Pilot (PP) States and Control Pilot (CP) States required to energise a free-standing or wall-mounted EV charger. Will also simulate PE Pre-test, CP Error “E” and PE Error with the added feature of CP signal output and load connection. Supplied with a type 1 and type 2 connector plug specifically designed for testing.
- Loop Impedance/PSCC
- Phase to Phase Loop with Phase Rotation Test
- Type AC, A, B & Time Delayed RCDs (S)
- Proximity Pilot (PP) State (13A, 20A, 32A & 63A)
- Control Pilot (CP) State (A,B,C & D)
- Supplied with Type 1 & Type 2 EV Plug
- 18th Editon Kit
View all: Di-Log Multifunction Testers
Add to basket for...
Delivered by our approved supplier,
Add to saved list…
|Manufacturer Guarantee||1 Year Guarantee|
|Pieces in Pack/Case||1|
|Product Type||18th Edition Multifunction Tester with Adaptor|
Delivered direct from our suppliers in the number of working days stated on the delivery button
Direct from our supplier delivery restrictions
Geographic restrictions apply, check your postcode below to see if any apply to you. For some locations delivery may take longer than the specified delivery time, and we can not currently offer delivery to offshore addresses.
Please ensure we have your mobile phone number when you order so we can keep you updated with deliveries.
DELIVERED FROM OUR APPROVED SUPPLIERS - FAQS
Were we able to answer your question? If not please Contact Us.