3-28mm Manual Multi-Material Pipe Cutter (49428)

Hello JordiJ, Our warehouse team have advised that this would require 60mm clearance for effective cutting. I hope this is useful. Thank you for using Q and A.JB

Hello Ianwagg. This cutter is capable of cutting copper tube so if the tube is made of a similarly or less hard/thick material I see no reason why it wouldn't work. Hope that helps. Thank you for using Q&A. MH

Absolute rubbish on plastic, blade is not deep enough to go through plastic without crushing it. You have to cut the pipe an inch longer than you want it using hacksaw then push a pipe insert into end of pipe then use the cutter on the part of the pipe fitted with the insert. Far too much messing about. Fine on 15mm copper but that's about it.

Hello, Unfortunately, this, as it is one of our low priced pipe cutters, will only cut copper and plastic pipe. It will not be able to cut aluminium tubing.

This product will not cut mild steel as it is designed for copper. The majority of our lower price bracket cutters will only cut plastic and copper, please see the more expensive ranges for other materials.