Can this be wired for a 3 phase supply ?
Asked by: Afrench1000
Can this be plumbed to supply got water to multiple sinks?
We intend to use this in a fast food premises and will have 3x sinks needing on demand hot water. Will this be sufficient if required to give hot water to all 3x sinks at any one time?
Also what is the running cost for this @ 15p kWh?
Thanks
Asked by: Zed148
Is this unit WRAS approved
Asked by: Professional1
How can I get mounting and connection details, depth is given as 86mm is this recessed overall or surface depth?
Asked by: Professional1
Can this be used for domestic purposes replacing a hot water cylinder?
Asked by: VortexFX
Hi. Thank you for taking interest in our product.
The Strom 21kw instantaneous water heater could be used for replacing a hot water cylinder, however we would not recommend this product as it is built mainly for commercial purposes, this product would require 3 phase electric which is uncommon in most UK households.
Answered by: Strom Limited Genius
Date published: 2019-12-09
Specification |
Advisory Notice |
This device will deliver approximately 10Ltr/min at an increase of 30°C to the incoming mains cold temperature. Flow rates higher than this will achieve a lower output temperature. |
Body Material |
ABS Body |
Brand |
Strom |
Connection Type |
G ½" |
Energy Rating |
A |
Fixings Supplied |
Fixings Supplied |
IP Rating |
IP25 |
Manufacturer Guarantee |
1 Year Guarantee |
Max. Flow Rate |
12 Ltr/min |
Maximum Bar Pressure |
6.0 bar |
Min. Flow Rate |
2 Ltr/min |
Minimum Bar Pressure |
0.2 bar |
Model Name/No |
SEIH21K3PTS1 |
Mount Type |
Wall-Mounted |
Overheat Protection |
Overheat Protection |
Pack Size |
1 |
Pieces in Pack/Case |
1 |
Power Output (Watts/Kw) |
21 kW |
Power Type |
Mains-Powered |
Power Voltage Supply |
400 V |
Product Depth |
86 mm |
Product Height |
385 mm |
Product Type |
Touchscreen Instantaneous Water Heater |
Product Width |
260 mm |
Suitable System |
Suitable for Commercial Use |
Temperature Control Type |
Manual Temperature Control |
Temperature Range |
30-55 °C |
Thermal Cut Out Temperature |
90 °C |
Total Product Weight |
6.1 kg |
Water Entry Points |
Bottom Only |
Water Heater Application |
Universal Water Heaters |
Water Heater Location |
Oversink |
Product contents
Water heater and mounting bracket kit.
*Delivered direct from our suppliers in the number of working days stated on the delivery button