Rated 1 out of
5
by
BClifford from
Approach with caution
given the other reviews i thought i would be pretty safe buying this but it was a mistake - no issues on the spec but the table is loose and floppy, and build quality very poor - if you want to do any work with any level of accuracy steer well clear !!!
Date published: 2020-12-07
Rated 4 out of
5
by
Tank0212 from
Workshop drill
Only had this a little while and seems good so far. The manual is not particularly good the images are poor will elements not identified, the written instructions miss out components in several steps; not major issues but if you have used/seen a drill of this type before you might struggle with assembly. This is a direct supplier delivered item and the tracking and communication around delivery was terrible, that being said it was delivered within the two day timeframe as stated but I had no idea it was out for delivery
Date published: 2020-08-27
Rated 4 out of
5
by
willwillbill from
week worth consideration
I found it as described, easy enough to put together with some good features, for the home serious DIY or budding home engineer I think its a good product for the price
Date published: 2020-06-16
Rated 3 out of
5
by
Wagtail01 from
A Little Disappointed
This is my second Scheppach power tool, And I've always thought German engineering was good, But the quality control I feel was missing on this pillar drill.
BAD POINTS
1, On the machine head one of Allen screws securing to the pillar is missing.
2, The On / Off switch is not square o the machine head. I have taken photos which can be provided.
The vice feels its made of lower cast and no securing bolts are provided which is a little disappointing.
GOOD POINTS
Fast Deliver.
The cross laser is a great feature.
Date published: 2019-09-22
Bench
Can this be secured to a workbench? Or is it freestanding?
Asked by: 2CanVanDam
Hi,
This machine comes with a base on the machine making it freestanding its advised to secure the machine to the bench using the holes in the base.
Answered by: Scheppach-Expert
Date published: 2021-02-18
mortice attachment
could this drill be fitted with a mortice attachment to its collar, if your unsure would you know what the collar diameter above chuck would be please ?
Asked by: Hunterduke
Hi,
The chuck knocks onto a spindle cone and the diameter of the spindle cone is 16mm
Answered by: Scheppach-Expert
Date published: 2020-10-23
Please excuse my ignorance but, what type of drill bit can be used with this bench drill. Thanks
Asked by: CBbb
Hello Most drill bits can be used on this drill press within its capabilities , high speed steel bits for instance are not good for MDF , you would need carbon drill bits .
This model accepts shanks up to 16mm , the correct speed must be selected for the material being drilled .
more detailed information regarding what types of drill bits are available can be found on the internet there are too many to list here .
Answered by: Scheppach-Expert
Date published: 2020-10-06
Does this pillar drill have a depth stop to ensure depth consistency on multiple cuts?
Asked by: Peake
Hello This model has a locking depth stop suitable for consistent multiple drilling
Answered by: Scheppach-Expert
Date published: 2020-11-28
I notice the DP16SL 405MM BRUSHLESS ELECTRIC CROSS-LASER BENCH DRILL is not fitted with a chuck, just an M2 taper, why ? Is it ok to permanently fit a keyed or keyless chuck with an Mr mortise. Does anyone have an online link to download a user manual.
Asked by: Royckk
Hi This machine is supplied with a 16mm keyless chuck which the user has to simply tap onto the morse taper supplied , this is normal with all drill presses . Please call the screwfix help line who should be able to have the manufacturer send the manual .
Answered by: Scheppach-Expert
Date published: 2020-03-08
| Specification |
| Brand |
Scheppach |
| Brushless |
Brushless |
| Chuck Capacity |
16mm |
| Chuck To Base Distance |
405 mm |
| Chuck To Table Distance |
305 mm |
| Chuck Type |
2 Morse Taper Chuck |
| Manufacturer Guarantee |
2 Year Manufacturer's Guarantee (T&Cs Apply) |
| Model No |
DP16SL |
| No Load Speed |
510-2430 rpm |
| Overload Protection |
Overload Protection |
| Pack Size |
1 |
| Pieces in Pack/Case |
1 |
| Plug Included |
Includes Plug. |
| Power Output (Watts/Kw) |
550 W |
| Power Supply |
Electric |
| Power Voltage Supply |
230 V |
| Product Depth |
235 mm |
| Product Height |
732 mm |
| Product Type |
Cross-Laser Bench Drill & Vice |
| Product Width |
235 mm |
| Spindle Travel |
50 mm |
| Supplier Manufacturer Helpline |
01484 400488 |
| Table Depth |
194 mm |
| Table Tilt Range |
45-0-45 ° |
| Table Width |
165 mm |
| Throat Depth |
127 mm |
| Total Product Weight |
23.5 kg |
Product contents
DP16SL drilling head stock, 16mm drill chuck, chuck key, plastic chuck guard, tubular support column, rack and pinion guide rack, drilling table, drill base, handles (3), R and F table handle, machine vice and fixing bolts.
*Delivered direct from our suppliers in the number of working days stated on the delivery button
