FloPlast Solvent Weld Waste Pipe White 40mm x 3m (44310)

£ 5.79INC VAT

Add to basket for...

Not available for delivery

FloPlast Solvent Weld Waste Pipe White 40mm x 3m (44310)

A lightweight yet strong and cost-effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twelve hours before testing the system. It is recommended that externally installed ABS waste systems are protected against prolonged exposure to sunlight with exterior gloss paint.

  • Lightweight & Strong

More Info

View all: FloPlast Solvent Weld Waste

£5.79INC VAT

Add to basket for...

Not available for delivery

Add to saved list...

Save
Rated 5 out of 5 by from Regular buyer Regularly buy my materials from Screwfix. Very reliable and a large amount of stock available. Staff are always friendly and helpful
Date published: 2022-08-03
Rated 5 out of 5 by from Good product Good product does the job would buy again easy to use.
Date published: 2022-07-20
Rated 5 out of 5 by from Highly recommended Excellent waste pipe easy to work with and looks nice and neat. Have been using for a full house renovation
Date published: 2022-05-24
Rated 5 out of 5 by from Original solvent weld pipe Used to complete a repair to the waste of a decontamination unit. Very easy to use with FloPlast fittings to make a professional looking repair to match original.
Date published: 2022-05-20
  • y_2022, m_9, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_122
  • loc_en_GB, sid_44310, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 8ms
  • REVIEWS, PRODUCT

What is the Wall thickness please in mm?

Asked by: IDMimagineering

Is it 40mm internal or external?

Asked by: Fisk
I know this reply is very late coming but I recently went through this same issue about diameter and thought this info may help other people. First bit of advice is to IGNORE ALL THE SPECS for external diameter (even on this site, or amazingly even the Floplast site) because they are all wrong. A good example as proof is if you buy a 40mm solvent weld Floplast fitting, it comes in a bag that reads 40mm, but the actual fittings in the bag have 43mm moulded into them, and they are DEFO 43mm. So why ? well the answer is that 40mm pipework (and fittings) are just a reference size. In reality they are available in either PUSH-FIT or SOLVENT WELD versions, and they are NOT the same size, or the same material, and they are not interchangable. 40mm PUSH-FIT pipe is 40-41mm ext dia. 40mm SOLVENT WELD pipe is 43mm ext dia. So just use/purchase the type you presently have, either PUSH-FIT or SOLVENT WELD, and you will be fine. Good luck ;-)
Answered by: ScrapheapSteve
Date published: 2022-08-14

Outside diameter

Hello, Is this a 40mm o/d pipe? Thanks, Terry
Asked by: J1ggy1
Generally speaking the wall thickness is 1.8mm for 40 and 32 ABS solvent weld pipe. Thus 40mm internal diameter plus 1.8-1.5mm wall thickness gives 43mm external diameter. due to it being solvent weld I find the small amount of difference in the wall thickness doesn't need to be factored as the glue will dissolve this on installation. 32mm solvent weld is 36mm external btw wall thickness of 1.8mm
Answered by: GeniePlumber
Date published: 2022-09-06

What is the impact/pressure rating of this pipe?

Please could you tell me if your waste pipes have an impact rating and if possible what type of pressure it would take to crack one installed against a plaster board wall on standard clips. Many thanks
Asked by: Val6678
We do not have any information on pressure or impact ratings for the waste system. As it is designed for gravity fed waste only there are no requirements for this testing to be carried out.
Answered by: FloPlast Ltd Tech Team
Date published: 2020-06-15

Can I use this product under floor slab running about 7m the connect to kitchen waste

Asked by: Promo
Yes, the ABS solvent system can be installed under a floor slab as long as it is lagged and protected.
Answered by: FloPlast Ltd Tech Team
Date published: 2020-07-20
  • y_2022, m_9, d_28, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_GB, sid_44310, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 8ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Brand FloPlast
CE Standard (Tested to EN...) BS EN 1455, KM548614.
Colour White
Connection Type Solvent Weld
Length of Pack (Combined) 3 m
Length of Single Piece 3 m
Manufacturer Guarantee 1 Year Guarantee
Model No WS02W
Pack Size 1
Parent Colour White
Pieces in Pack/Case 1
Product Diameter 40 mm
Product Length 3 m
Product Type Waste Pipe